Seastar Solutions i7700 Installation Manual page 52

Forward/Reverse Throttle Curve – There are two throttle curves that
control the response characteristics when the control lever is at or near
idle. Curve 1 is the default curve, and is suitable for most applications.
Curve 2 requires more lever travel before throttle is increased.
Station Protect – When enabled (Yes), this feature prevents accidental
switching between control stations on multi-station boats by requiring a
specific sequence of button presses. Refer to Book 70– i7700 User
Manual for more information.
Control Head Instance – If you are setting up a second station, change
this parameter to Second.
Shift and Throttle Type – Ensure this parameter is set to SeaStar i7700.
C-10 © 2017 SeaStar Solutions i7700 Installation Supplement, Rev. B