Utility Screen; Panel Setup - Yamaha DZR315 User's Reference Manual

e OUTPUT
Sets the output level. Output levels can be set in 0.5 dB increments.
Dante model

DZR-D series
Standard model

DZR series
• ANA. OUT1 LVL: Sets analog output level A1
• ANA. OUT2 LVL: Sets analog output level A2
• DNT. OUT1 LVL: Sets Dante output level D1.
• DNT. OUT2 LVL: Sets Dante output level D2.
NOTE
Settings of DNT. OUT1 LVL and DNT. OUT2 LVL will be supported in a future version.

DXS-XLF-D series

DXS-XLF series
o, channel 1 output level).
(page 7
o, channel 2 output level).
(page 7

UTILITY Screen

The UTILITY screen is used to configure device settings, and save and load settings data
to and from a USB flash drive.
Dante model
Screen after scrolling
downwards


PANEL SETUP

Sets the rear panel display method.
q
w
e
q BRIGHTNESS
Sets the brightness of the back light of the display.
This setting can be set in 10 steps from 1 to 10.
Screen Functions
Standard model
Screen after scrolling
downwards
19