Table of Contents
Advertisement
About the "PJP-25URS Controller" screen
"Home" screen
2
4
5
6
7
9
y
To switch between "Home" and "Detail" screens, click
■ Items in the "Home" screen
1 Turn off (mute) the microphones of this unit
temporarily. To cancel the mute function, click the
box again.
2 Shows the microphone status (microphone array
angles and audio pickup area).
y
• The current microphone pickup area is shown in dark
green and light green. Sounds picked up from the dark
green area provide the highest quality sounds. The
uncolored (white) area shows the area where the
microphone cannot pick up sounds well. We suggest
speaking within the microphone pick up area (within
1.5 m of the microphone).
• When the microphone is muted, the corresponding
graphic is displayed.
3 Turn off (mute) the speaker of this unit
temporarily. To cancel the mute function, click the
box again.
4 Adjust the speaker volume of this unit.
14
"Detail" screen
1
0
A
B
3
C
8
D
or
5 Shows the electrical power which this unit can
use for audio output.
Level 3 (lights in green): normal
Level 2 (lights in yellow): the volume is turned down
automatically (auto-attenuator)
Level 1 (blinks in red): the speaker is turned off
(speaker mute)
y
Since this unit works according to the USB standard, it
may turn on the attenuator or speaker mute function
automatically to protect the system in case the unit detects
high audio levels. If this happens repeatedly, turn down the
volume.
6 Select "Wide", "Stereo" or "Mono" for the
playback mode. The EUPHONY system works in
case "Wide" or "Stereo" is selected. This unit
reproduces stereo sound giving wider
surrounding feeling in the "Wide" mode
compared to "Stereo".
"Wide" and "Stereo" settings are available only
when "USB bandwidth usage" is set to
"Wideband" and the operation mode is set to
"Speaker".
7 Update the firmware of this unit. For details, refer
to "Using the Latest Features" (page 16).
8 Display the User's Manual (this document).
9 Set the operation mode of this unit. To use this
unit with Skype, select "Mic & Speaker". To use
this unit as a speaker, select "Speaker".
.
Advertisement
Table of Contents
