Yamaha DZR315 User's Reference Manual page 38

Number Message
56 USB: STORAGE FULL!
58 USB: LOAD ERROR
59 USB: OVER CURRENT
65 INCOMPATIBLE DATA LOADED
70 POWER TURNED ON
71 POWER TURNED OFF
72 SHORT INTERRUPTION
73 HOST FIRMWARE UPDATE COMPLETED
74 PANEL UNLOCKED
77 PRESET RECALLED[*]
78 PRESET STORED[*]
79 PRESET CLEARED[*]
80 BACKUP DATA LOADED
81 PIN CODE LOADED
82 PIN CODE CHANGED
83 WRONG PIN CODE
85 Dante FIRMWARE UPDATE COMPLETED
90
ALL DATA INITIALIZED
91
Symptom
Insufficient USB flash drive space.
An error occurred while loading a file from a
USB flash drive. Internal data corruption may
have occurred within this product.
The power supply stopped due to excess cur-
rent flowing to the USB terminal.
Changed incompatible data contained within
the loaded file to the default settings.
The power turned on.
The power turned off.
Restarted system after performing a shutdown
due to an instantaneous power failure.
Firmware update completed.
Removed panel lock.
Recalled preset. (*: Preset number)
Stored preset. (*: Preset number)
Cleared preset. (*: Preset number)
Loaded settings data from the USB flash drive
using RESTORE FROM USB on the DEVICE
BACKUP screen.
Loaded PIN code from the USB flash drive.
PIN code has been changed.
Wrong PIN code entered.
Successfully updated the Dante firmware.
All parameter settings reset back to their default
values.
Countermeasure
Use a USB flash drive with a sufficient amount of available space.
Please try again. A message appears on the display while the USB flash drive is being
accessed. Do not remove the USB flash drive while the message appears.
Remove the USB flash drive from the USB terminal, and then turn on the power again.
Connect to a stable power source.
Reference
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
38