Id Settings; Device Id Auto Set; Pc Connection Cable - Samsung UH46N-E User Manual

ID Settings

HOME → ID Settings → ENTER E
ID Settings
– The displayed image may differ depending on the model.
Assign an ID to a set.
Press u/d to select a number, and press E.
ID Settings
Enter the ID number of the product connected to the input cable for input signal reception. (Range: 0~224)
― Enter the number you want using the number buttons on the remote control.

Device ID Auto Set

― Assign ID number automatically for all connected products.

PC Connection Cable

Select a method to connect to MDC to receive the MDC signal.
• RS232C cable
Communicate with MDC via the RS232C-stereo cable.
• RJ45(LAN) cable
Communicate with MDC via the RJ45 cable.
55