Screen Lamp Schedule; No Signal Power Off; Auto Power Off; Temperature Control - Samsung UH46N-E User Manual

Screen Lamp Schedule

The panel brightness is adjusted according to the
makes the panel brighter.
― This option is enabled when
Clock Set
• Off / On

No Signal Power Off

Save power by turning the device off when no signal is received from any source.
• Off / 15 min. / 30 min. / 60 min.
― Disabled when an attached PC is in power saving mode.
― The product will automatically power off at a specified time. The time can be changed as
required.

Auto Power Off

The product will automatically turn off if you don't press a button on the remote or touch a
button on product front panel within select hours to prevent overheating.
• Off / 4 hours / 6 hours / 8 hours
Screen Lamp Schedule. A value closer to 100
is configured.

Temperature Control

MENU m → System → Temperature Control
This function detects the internal temperature of the product. You can specify the temperature
range that is acceptable.
The default temperature is set to 77 ℃.
Recommended temperature for Temperature Control
surrounding temperature is 40 ℃).
― The screen will become darker if the current temperature exceeds the specified
temperature limit. If the temperature continues to rise, the product will power off to
prevent overheating.

Change PIN

MENU m → System → Change PIN → ENTER E
The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter it in
Enter the PIN again..
When the Confirm screen disappears, press the
new PIN.
― Default password: 0 - 0 - 0 - 0
― Change the PIN to keep your device secure.
→ ENTER E
is 75 ℃ ~ 80 ℃ (provided that the
Enter a new PIN.. Reenter the same 4 digits in
Close button. The product has memorised your
69