Samsung UH46N-E User Manual page 30

Auto adjustment control (PC and BNC only)
• Function
Automatically adjust the PC system screen using a PC.
• Viewing auto adjustment state (Get Auto Adjustment Status)
None
• Setting auto adjustment (Set Auto Adjustment)
Header Command ID
0xAA 0x3D
"Auto Adjustment" : 0x00 (at all times)
• Ack
Header Command ID Data
length
0xAA 0xFF 3
• Nak
Header Command ID Data
length
0xAA 0xFF 3
"ERR": A code showing what error has occurred
Data length Data Checksum
1 "Auto
Adjustment"
Ack/Nak r-CMD Val1
'A' 0x3D "Auto
Adjustment"
Ack/Nak r-CMD Val1
'A' 0x3D "ERR"
Video Wall Mode Control
• Function
Video Wall mode can be activated on a product using a PC.
This control is only available on a product whose
• Viewing video wall mode (Get Video Wall Mode)
Header Command
0xAA 0x5C
• Setting the video wall (Set Video Wall Mode)
Header Command
0xAA 0x5C
Checksum
"Video Wall Mode": A code used to activate Video Wall mode on a product
1: Full
0: Natural
• Ack
Header Command
Checksum
0xAA 0xFF
"Video Wall Mode": A code used to activate Video Wall mode on a product
• Nak
Header Command
0xAA 0xFF
"ERR": A code showing what error has occurred
Video Wall
ID Data length Checksum
0
ID Data length Data
1 "Video Wall Mode"
ID Data Ack/Nak r-CMD
length
3 'A' 0x5C
ID Data Ack/Nak r-CMD
length
3 'A' 0x5C
is enabled.
Checksum
Val1 Checksum
"Video Wall
Mode"
Val1 Checksum
"ERR"
30