Samsung DE40A User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Monitor
  5. DE40A
  6. User manual

Samsung DE40A User Manual

Hide thumbs Also See for DE40A:
Table of Contents

Advertisement

Quick Links

See also: Service Manual

User Manual

ME40A ME46A ME55A
DE40A DE46A DE55A
UE46A UE55A
The color and the appearance may differ depending on
the product, and the specifications are subject to
change without prior notice to improve the performance.
BN46-00098B-06

Advertisement

Table of Contents
loading

Related Manuals for Samsung DE40A

Summary of Contents for Samsung DE40A

  • Page 1: User Manual

    User Manual ME40A ME46A ME55A DE40A DE46A DE55A UE46A UE55A The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00098B-06...

  • Page 2: Before Using The Product

    2011 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.

  • Page 3: Storage

    Before Using the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. The following images are for reference only. Real-life situations may differ from what is shown in the images.

  • Page 4: Safety Precautions

    Before Using the Product Safety Precautions Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

  • Page 5: Electricity And Safety

    Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result.

  • Page 6: Installation

    Do not disconnect the power cord while the product is being used. The product may become damaged by an electric shock.  Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. A fire or electric shock may result.
  • Page 7 Before Using the Product Keep the plastic packaging out of the reach of children. Children may suffocate.  Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.) The product may fall and become damaged and/or cause an injury. ...

  • Page 8: Operation

    Be sure to consult Samsung Customer Service Center if you want to install  the product at such a place.
  • Page 9 Before Using the Product During a lightning or thunderstorm, remove the power cord and do not touch the antenna cable. A fire or electric shock may result.  Do not drop objects on the product or apply impact. A fire or electric shock may result. ...
  • Page 10 Be sure to power off the product and disconnect the power cord when water  or other foreign substances have entered the product. Then contact Samsung Customer Service Center. Product failure, an electric shock or fire may result.  Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.
  • Page 11 Before Using the Product Do not use humidifiers or stoves around the product. A fire or electric shock may result.  Rest your eyes for more than 5 minutes for every 1 hour of product use. Eye fatigue will be relieved. ...

  • Page 12: Table Of Contents

    Table Of Contents BEFORE USING THE PRODUCT PREPARATIONS CONNECTING AND USING A SOURCE DEVICE Copyright Cleaning Storage Safety Precautions Symbols Electricity and Safety Installation Operation Checking the Contents Removing the Packaging Checking the Components Parts Control Panel Reverse Side Anti-theft Lock Remote Control Before Installing the Product (Installation Guide)
  • Page 13 Table Of Contents USING MDC Connecting and Using a PC Connecting to a PC Changing the Resolution Connecting to a Video Device Connection Using the AV Cable Connection Using the component Cable Connection Using an HDMI-DVI Cable Connection Using an HDMI Cable Connecting an External Monitor Connecting to an Audio System Changing the Input source...
  • Page 14 Table Of Contents SCREEN ADJUSTMENT What is MDC? Connecting to MDC Connection Management Auto Set ID Cloning Command Retry Getting Started with MDC Main Screen Layout Menus Screen Adjustment Sound Adjustment System Setup Tool Settings Other Functions Troubleshooting Guide Picture Mode If the input source is PC, DVI or DP If the input source is AV, Component, HDMI Backlight / Contrast / Brightness /...
  • Page 15 Table Of Contents SOUND ADJUSTMENT MEDIA Advanced Settings Black Tone Dynamic Contrast Shadow Detail Gamma Expert Pattern RGB Only Mode Colo(u)r Space White Balance 10p White Balance (Off / On) Flesh Tone Edge Enhancement (Off / On) Motion Lighting (Off / On) LED Motion Plus (Off / On) Picture Options Colo(u)r Tone...
  • Page 16 Table Of Contents NETWORK SYSTEM Videos Playing a Video Photos Viewing a Photo (or Slide Show) Music Playing Music Videos / Photos / Music - Additional Functions Sorting the file lists Videos/Photos/Music Play Option menu Source Source Edit Name Information Refresh AllShare Network Settings...
  • Page 17 Table Of Contents Time Clock set Sleep Timer On Timer Off Timer Holiday Management Menu Language Eco Solution Energy Saving Eco Sensor (Off / On) No Signal Power Off Auto Power Off (Off / On) Security Safety Lock (Off / On) Button Lock (Off / On) Change PIN Auto Protection Time...
  • Page 18 DivX® Video On Demand Network Remote Control Reset System Reset All Software Upgrade By USB Alternative Software Contact Samsung File Formats Compatible with MagicInfo Lite Player Video / Audio Network Schedule Connecting to a server MagicInfo Lite Settings Approving a connected device from the server...
  • Page 19 When Content is Running Viewing the details of the content that is running Changing the settings for the content that is running Requirements Before Contacting Samsung Customer Service Center Testing the Product Checking the Resolution and Frequency Check the followings. Q & A...
  • Page 20 Table Of Contents APPENDIX INDEX Contact SAMSUNG WORLDWIDE Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality Prevention of Afterimage Burn-in Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only Correct disposal of batteries in this...

  • Page 21: Preparations

    Preparations Checking the Contents 1.1.1 Removing the Packaging Remove the black locking device at the bottom of the box. Using the grooves in the box, lift and remove the top of the box. Check the components and remove the styrofoam and plastic bag. The appearance of actual components may differ from the image shown.

  • Page 22: Checking The Components

    Preparations 1.1.2 Checking the Components Contact the vendor where you purchased the product if any components are missing.  The appearance of the components and items sold separately may differ from the image shown.  Components Components may differ in different locations. Quick setup guide MagicInfo Lite Edition Software CD...
  • Page 23 Preparations Items sold separately The stand is not supplied.  The following items can be purchased at your nearest retailer.  Wall-mount KIT HDMI-DVI Cable RCA stereo cable Stereo cable RS232C stereo cable HDMI cable Video cable Component cable DVI cable DP cable LAN cable RCA cable...

  • Page 24: Parts

    Preparations Parts 1.2.1 Control Panel The color and shape of parts may differ from what is shown. Specifications are subject to change  without notice to improve quality. Keep the area between the remote sensor and remote control obstacle-free.  SOURCE MENU Sensor...

  • Page 25: Reverse Side

    Preparations Sensor Remote sensor 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. AMBIENT SENSOR IN IR OUT AUDIO RGB / DVI / DP / HDMI AUDIO IN HDMI IN DVI OUT...
  • Page 26 Preparations Port Description [RGB / DVI / DP / HDMI Receives sound from a PC via an audio cable. AUDIO IN] Connect to a USB memory device. [USB] [AV IN / COMPONENT IN] Connects to a source device using the AV/component adapter. [DP IN] Connects to a PC using a DP cable.

  • Page 27: Anti-Theft Lock

    Preparations Assembling the Holder-Wire stand * Stand : Sold separately 1.2.3 Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places.  The locking device shape and locking method depend on the manufacturer. Refer to the user ...

  • Page 28: Remote Control

    Preparations 1.2.4 Remote Control Using other display devices in the same space as the remote control of this product can cause the  other display devices to be inadvertently controlled. Remote control button functions may differ for different products.  This is a special remote control for the visually impaired persons and has Braille points on the ...
  • Page 29 Preparations Adjusting the OSD with the Remote Control MENU To place batteries in the remote control Open the OSD menu. Select from Picture, Sound, Media, Network, in the displayed OSD menu screen. Change settings as desired. Finish setting. Close the onscreen display (OSD) menu. System Support 1 Preparations...
  • Page 30 Preparations Remote Control Reception Range Use the remote control within 7m to 10m from the sensor on the product at an angle of 30 from the left and right. Store used batteries out of reach of children and recycle.  Do not use a new and used battery together.

  • Page 31: Before Installing The Product (Installation Guide)

    Make sure to install the specified wall mount.  1.3.1 Tilting Angle and Rotation Contact Samsung Customer Service Center for further details. 15 Û The product can be tilted at a maximum angle of 15 from a perpendicular wall surface.

  • Page 32: Ventilation

    Preparations 1.3.2 Ventilation 1. Installation on a Perpendicular Wall Figure 1.1 Side view Minimum 40 mm Ambient temperature: Under 35 C When installing the product on a perpendicular wall, allow  at least 40mm of space between the product and wall surface for ventilation and ensure that the ambient temperature is kept below 35 C.
  • Page 33 Preparations 2. Installation on an Indented Wall Contact Samsung Customer Service Center for further details. Figure 1.2 Side view When installing the product on an indented wall, allow at least the space specified above between the product and wall for ventilation and ensure that the ambient temperature is kept below 35 C.

  • Page 34: Dimensions

    Preparations 1.3.3 Dimensions Model name ME40A / DE40A 920.0 ME46A / DE46A 1055.2 ME55A / DE55A 1246.4 UE46A 1030.4 UE55A 1221.8 All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your product. Not responsible for typographical or printed errors.

  • Page 35: Installing The Wall Mount

    We recommend you contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.
  • Page 36 Do not fasten the screws too firmly. This may damage the  product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. Samsung is not liable for product damage or personal injury ...

  • Page 37: Remote Control (Rs232C)

    Preparations Remote Control (RS232C) 1.5.1 Cable Connection Interface Bit rate Data bits Parity Stop bit Flow control Maximum length Pin assignment  1 2 3 4 5 6 7 8 9 RS232C (9 pins) TxD (No. 2), RxD (No. 3), GND (No. 5) 9600 bps 8 bit None...
  • Page 38 Preparations RS232C cable  Connector: 9-Pin D-Sub to Stereo Cable -P1- -P1- Female Connection  RS232C -P1- -P2- --------> <-------- --------- RS232C RS232C -P2- STEREO PLUG (3.5ø) -P2- STEREO PLUG (3.5ø) RS232C 1 Preparations...

  • Page 39: Control Codes

    Preparations 1.5.2 Control Codes Viewing control state (Get control command) Header Command Command 0xAA type Controlling (Set control command) Header Command Command 0xAA type Command Power control Volume control Input source control Screen mode control Screen size control PIP on/off control Auto adjustment control Video wall mode control Safety Lock...
  • Page 40 Preparations To control all devices connected by a serial cable simultaneously irrespective of IDs, set the ID as  "0xFE" and transmit commands. Commands will be executed by each device but ACK will not respond. Power control Function  A product can be powered on and off using a PC. Viewing power state (Get Power ON / OFF Status) ...
  • Page 41 Preparations Volume control Function  The volume of a product can be adjusted using a PC. Viewing volume state (Get Volume Status)  Header Command 0xAA 0x12 Setting the volume (Set Volume)  Header Command 0xAA 0x12 "Volume": Volume value code to be set on a product (0-100) ...
  • Page 42 Preparations Input source control Function  The input source of a product can be changed using a PC. Viewing input source state (Get Input Source Status)  Header Command 0xAA 0x14 Setting the input source (Set Input Source)  Header Command 0xAA 0x14...
  • Page 43 Preparations Comma Header 0xAA 0xFF "Input Source": An input source code to be set on a product  Comma Header 0xAA 0xFF "ERR" : A code showing what error has occurred Data length Ack/Nak ‘A’ Data length Ack/Nak ‘N’ r-CMD Val1 Checksu "Input...
  • Page 44 Preparations Screen Function  The screen mode of a product can be changed using a PC. Screen mode cannot be controlled when the This control can only be used on models that include a product. Viewing screen status (Get Screen Mode Status) ...
  • Page 45 Preparations Screen size control Function  The screen size of a product can be changed using a PC. Viewing the screen size (Get Screen Size Status)  Header Command 0xAA 0x19  Comma Header 0xAA 0xFF "Screen Size": Product screen size (range: 0 – 255, unit: inch) ...
  • Page 46 Preparations PIP On/Off control Function  The PIP mode of a product can be turned on or off using a PC. Only available on models that have the PIP function  The mode cannot be controlled if  This function is not available in MagicInfo. ...
  • Page 47 Preparations Auto adjustment control (PC and BNC only) Function  Automatically adjust the PC system screen using a PC. Viewing auto adjustment state (Get Auto Adjustment Status)  Setting auto adjustment (Set Auto Adjustment)  Header Command 0xAA 0x3D "Auto Adjustment" : 0x00 (at all times) ...
  • Page 48 Preparations Video Wall Mode Control Function  Video Wall Mode can be activated on a product using a PC. This control is only available on a product whose This function is not available in MagicInfo. Viewing video wall mode (Get Video Wall Mode) ...
  • Page 49 Preparations Safety Lock Function  PC can be used to turn the Safety Lock function on or off on a product. This control is available regardless of whether or not the power is turned on. Viewing the safety lock state (Get Safety Lock Status) ...

  • Page 50: Connecting And Usinga Source Device

    Connecting and Using a Source Device Before Connecting Check the following before you connect this product with other devices. Devices that can be connected to this product include PCs, camcorders, speakers, set top boxes and DVD/Blu-ray Disc players. 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it.

  • Page 51: Connecting And Using A Pc

    Connecting and Using a Source Device Connecting and Using a PC 2.2.1 Connecting to a PC A PC can be connected to the product in a variety of ways.  Select a connection method suitable for your PC. After connecting the PC, connect the power cable. ...
  • Page 52 Connecting and Using a Source Device Connection Using an HDMI-DVI Cable When you connect a PC to the product using an HDMI-DVI cable, set video and audio content stored on the PC. Connection Using an HDMI Cable HDMI IN RGB / DVI / DP / HDMI AUDIO IN Edit Name DVI PC...
  • Page 53 Connecting and Using a Source Device Connection Using an DP Cable DP IN 2 Connecting and Using a Source Device...

  • Page 54: Changing The Resolution

    Connecting and Using a Source Device 2.2.2 Changing the Resolution Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel Display...
  • Page 55 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution, and change the resolution. **** **** 2 Connecting and Using a Source Device...

  • Page 56: Connecting To A Video Device

    Connecting and Using a Source Device Connecting to a Video Device You can connect a video device to the product using a cable.  Connecting parts may differ in different products.  Press the  2.3.1 Connection Using the AV Cable 2.3.2 Connection Using the component Cable SOURCE button on the remote control to change the source.

  • Page 57: Connection Using An Hdmi-Dvi Cable

    Connecting and Using a Source Device 2.3.3 Connection Using an HDMI-DVI Cable Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable.  To resolve this, additionally connect an audio cable to the audio ports on the product and video device.

  • Page 58: Connection Using An Hdmi Cable

    Connecting and Using a Source Device 2.3.4 Connection Using an HDMI Cable Using an HDMI cable or HDMI to DVI Cable (up to 1080p) For better picture and audio quality, connect to a digital device using an HDMI cable.  An HDMI cable supports digital video and audio signals, and does not require an audio cable.

  • Page 59: Connecting An External Monitor

    Connecting and Using a Source Device 2.3.5 Connecting an External Monitor The following images are for reference only. Real-life situations may differ from what is shown in the  images. The Loopout function can be used to duplicate the screen of the primary display. Connect [DVI ...

  • Page 60: Changing The Input Source

    Connecting and Using a Source Device Changing the Input source 2.4.1 Source MENU Media Source allows you to select a variety of sources and change source device names. Source You can display the screen of a source device connected to the product. Select a source from source list to display the screen of the selected source.

  • Page 61: Connecting The Network Box

    Connecting and Using a Source Device Connecting the network box For details on how to connect to a network box, refer to the user's manual provided with the network box upon purchase. 2.5.1 MagicInfo To use MagicInfo, a network box (sold separately) must be connected to the product. To change the MagicInfo settings, run "MagicinfoSetupWizard"...
  • Page 62 Connecting and Using a Source Device Select the default application you want to run when MagicInfo starts. MagicInfo Setup Wizard - v.1.12 Select Application - step 1 MagicInfo Pro (LAN, WAN based version) MagicInfo-i Premium (Web-based version) Select Later < Back(B) Next(N) >...
  • Page 63 Connecting and Using a Source Device Select a language. (The default language is English.) MagicInfo Setup Wizard - v.1.12 Select Language -step 3 Select the language you want to install on the system for menus and dialogs. Current Language Engilsh Chinese [Traditional] German English...
  • Page 64 Connecting and Using a Source Device Double-check the settings you have just configured. MagicInfo Setup Wizard - v.1.12 Setup Information 1. Application : MagicInfo Pro [LAN,WAN based version\ 2. Internet Protocol [TCP/IP] IP : 192.168.0.102 3. Language : English 4. Screen Type : Landscape Do not show again <...

  • Page 65: Using Mdc

    Using MDC MDC (Multiple Display Control) is an application that allows you to easily control multiple display devices simultaneously using a PC. Configuring Settings for Multi Control MENU System Assign an individual ID to your product. 3.1.1 Configuring settings for Multi Control MDC Connection ...

  • Page 66: Communicate With Lan Cable

    Using MDC Communicate with LAN cable Multiple products can be connected using the [RJ45] port on the product and the LAN ports on the HUB. Communicate with Stereo cable via the LAN cable Multiple products can be connected using the [RS232C IN / OUT] port on the product. RJ45 RS232C OUT RJ45...

  • Page 67: Mdc Program Installation/Uninstallation

    Using MDC MDC Program Installation/Uninstallation 3.5.1 Installation Insert the installation CD into the CD-ROM drive. Click the MDC Unified installation program. If a software installation window is not displayed on the main screen, install with the "MDC Unified" execution file in the MDC folder on the CD. Click "Next"...

  • Page 68: What Is Mdc

    Using MDC What is MDC? Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC. 3.6.1 Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports on the PC and monitor. Using MDC via Ethernet Enter the IP for the primary display device and connect the device to the PC.

  • Page 69: Connection Management

    Using MDC 3.6.2 Connection Management Connection management includes the Connection list and Connection list modification options. Connection list – Connection list shows the details of the connections such as connection setting (IP/ COM, Port No, MAC, and Connection Type), connection status, Set ID Range, and detected devices. Each connection can contain a maximum of 100 devices connected in serial daisy-chain fashion.

  • Page 70: Auto Set Id

    Using MDC 3.6.3 Auto Set ID Auto Set ID feature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection. There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisy- chain running from 1 to 99, and then finally to Set ID 0.

  • Page 71: Cloning

    Using MDC 3.6.4 Cloning Using the Cloning feature, you can copy the setting of one LFD and apply it to multiple selected LFDs. You can select specific tab categories or all tab categories for cloning, using the copy setting option window.

  • Page 72: Command Retry

    Using MDC 3.6.5 Command Retry This feature is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply from an LFD. The retry count value can be set using the MDC options window.

  • Page 73: Getting Started With Mdc

    3.6.6 Getting Started with MDC To start the program, click Start Click Add to add a display device. If the connection is established via RS232C, go to Serial and specify the COM Port.  Programs Samsung MDC Unified. 3 Using MDC...
  • Page 74 Using MDC If the connection is established via Ethernet, enter the IP that was entered for the display  device. 3 Using MDC...

  • Page 75: Main Screen Layout

    Using MDC 3.6.7 Main Screen Layout Menu Bar Device Category Schedule Category Set List Modify the Set List Help Topics Change the status of a display device or the properties of the program. View a list of connected display devices or device groups. View a list of schedules for display devices.

  • Page 76: Menus

    Using MDC 3.6.8 Menus You can power on or off a selected device or change the input source or volume of the device. Choose display devices from the list of sets, and select the Home tab. Home Select an item and change the corresponding setting. Power On: Power on a selected display.
  • Page 77 Using MDC This menu shows a list of display devices which have following errors - fan error, temperature  error, brightness sensor error, or lamp error. Select a display device from the list. The Repair button will be enabled. Click the refresh button to refresh the error status of the display device.

  • Page 78: Screen Adjustment

    Using MDC 3.6.9 Screen Adjustment The screen settings (contrast, brightness, etc.) can be adjusted. Choose display devices from the list of sets, and select the Picture tab. Custom Select an item and change the corresponding screen setting. Color and Tint are not available if the input source is PC. ...
  • Page 79 Using MDC Blue Customize the intensity of blue color for the selected display device.  3 Using MDC...
  • Page 80 Using MDC Options Dynamic Contrast Adjust the Dynamic Contrast for the selected display device. Gamma Control Change the gamma value for the selected display. Auto Motion Plus This option is used to view dynamic images. Off: Disable the Auto Motion Plus function. ...
  • Page 81 Using MDC Size Picture Size Adjust the screen size for the selected display device. The Detail item will be disabled if Picture Size is set to a mode that does not support detailed configuration. The -/+ buttons can be used to adjust Zoom. The screen can be relocated using the up/down/left/right buttons.

  • Page 82: Sound Adjustment

    Using MDC 3.6.10 Sound Adjustment You can change the sound settings. Choose display devices from the list of sets, and select the Sound tab. The Bass or Treble item will be disabled if the item is not supported by the selected set. Bass Adjust the bass for the selected display.

  • Page 83: System Setup

    Using MDC 3.6.11 System Setup Choose display devices from the list of sets, and select the System tab. Video Wall The Video Wall function can be used to display part of a whole picture or repeat the same picture on each of connected multiple display devices.
  • Page 84 Using MDC Select the number of horizontal display devices. A maximum of 15 displays can be arranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to H. Select the number of vertical display devices. A maximum of 15 displays can be arranged in a row.
  • Page 85 Using MDC Basic information required to adjust PIP will appear in the menu screen. PIP will be disabled when Video Wall is ON.  Note that Picture Size is disabled when PIP is ON.  PIP Size View the PIP Size of the current display. PIP Source Select a PIP input source.
  • Page 86 Using MDC General User Auto Color Automatically adjust the screen colors. Available only in PC mode. Auto Power Set the product to automatically power on. Standby Control Set the standby mode to activate if an input source is not detected. Fan &...
  • Page 87 Using MDC Security Safety Lock Lock the on-screen menus. To unlock the menus, set Safety Lock to Off. Button Lock Lock the buttons on the display device. To unlock the buttons, set Button Lock to Off. OSD Display Source OSD Select whether to display a message when the Source is changed.
  • Page 88 Using MDC Time Clock Set Change the current time on the selected display device according to the time set on a PC. If the time is not set on the display device, null values will be displayed. Timer On Time: Set the time to power on the selected display device. ...
  • Page 89 Using MDC Once: Activate the timer only one time.  EveryDay: Activate the timer every day.  Mon~Fri: Activate the timer from Monday through Friday.  Mon~Sat: Activate the timer on Saturdays and Sundays.  Manual: Customize days of the week. ...
  • Page 90 Using MDC Screen Burn Protection Pixel Shift Move the screen slightly at specified time intervals to prevent screen burn-in. Screen Saver This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time. Interval: Set the interval to activate the Screen Saver.

  • Page 91: Tool Settings

    Using MDC The Safety Screen function can be used to prevent screen burn-in when a stationary image displays on the screen of a display device for an extended period of time. Lamp Control Lamp Control is used to adjust the backlight to reduce power consumption. Automatically adjust the backlight of the selected display device at a specified time.
  • Page 92 Using MDC Reset Reset Picture Reset the screen settings. Reset Sound Reset the sound settings. Reset System Reset the system settings. Reset All Reset the screen, sound and system settings at the same time. Edit Column Select the items you want to display in the list of sets. Information View the program information.

  • Page 93: Other Functions

    Using MDC 3.6.13 Other Functions Resizing a Window Place the mouse pointer on a corner of the program window. An arrow will appear. Move the arrow to customize the size of the program window. 3 Using MDC...
  • Page 94 Using MDC Group Management Creating Groups Create groups and manage the list of sets on a group basis. Duplicate group names cannot be used. Right-click and select Group>Edit in the display device list section on the left side of the program window.
  • Page 95 Using MDC The Add on the same level button is enabled only if at least one group is created. Enter the group name. Deleting Groups Select a group name, and click Edit. In the Edit Group window displayed, click Delete. Click Yes.
  • Page 96 Using MDC Schedule Management Creating Schedules Create and register a schedule on a group basis. Click All Schedule List in the schedule section on the left side of the program window. The Add button will be enabled in the middle. Click the Add button.
  • Page 97 Using MDC Click Add below the Device Group item, and select the group you want to add a schedule to. Select Date&Time/Action and click OK. The schedule will be added and a list of schedules will appear in the set list window. Device Group: Select a group.

  • Page 98: Troubleshooting Guide

    Using MDC 3.6.14 Troubleshooting Guide Issue The display you want to control does not appear on the system information chart. The display you want to control does not appear on the other Control Info Grids. The following message appears repeatedly. Displays power on or off at different time from one another even though On Time or Off Time is set.
  • Page 99 Using MDC How display properties are shown when multiple displays are used When no display is selected: The default value is displayed. When one display is selected: Settings for the selected display are displayed. When two displays are selected (e.g. in sequence of ID 1 andID 3): The settings for ID 1 are displayed before the settings for ID 3.

  • Page 100: Screen Adjustment

    Screen Adjustment Configure the Picture The layout of the Picture Picture Mode MENU Picture Select a picture mode (Picture Different Picture Mode options are displayed depending on the current input source. 4.1.1 If the input source is PC, DVI or DP Information: This mode reduces eye fatigue and is suitable for displaying information to the public.

  • Page 101: Backlight / Contrast / Brightness / Sharpness / Colo(U)R / Tint(G/R)

    Screen Adjustment Backlight / Contrast / Brightness / Sharpness / Colo(u)r / Tint(G/R) MENU Picture Your product has several options for adjusting picture quality. Select an option using the buttons, and then press [ When done, press [ When you make changes to Backlight, Contrast, Brightness, Sharpness, ...

  • Page 102: Picture Size

    Screen Adjustment 4.3.1 Picture Size If you have a cable box or satellite receiver, it may have its own set of screen sizes as well. However, we highly recommend you use your product 16:9: Sets the picture to 16:9 wide mode. ...

  • Page 103: Position

    Screen Adjustment Press the button to move the picture up or down. Press the [ ] button. Select Close by pressing the Reset. To use the Position function after selecting (1080i/1080p) or Custom, follow these steps. Press the button to select Position. Press the [ ] button.

  • Page 104: Using The 3D Function (Ue46A & Ue55A Models Only)

    4.5.1 3D Mode This exciting new feature enables you to view 3D content. In order to fully enjoy this feature, you must purchase a pair of Samsung 3D Active Glasses to view 3D video. 4.5.2 Viewing product Using the 3D function IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES.
  • Page 105 Screen Adjustment 3D Mode Side by Side Top & Bottom Line by Line Vertical Stripe Checker Board Frame Sequential Some file format may not supported the “2D  “Side by Side” and “Top & Bottom” are available when the resolution is 720p, 1080i and ...
  • Page 106 Screen Adjustment Resolution 1280 x 720p 1920 x 1080i 1920 x 1080p Resolution supported for HDMI PC mode The resolution for HDMI PC mode is optimized to 1920 x 1080 input. An input resolution other than 1920 x 1080 may not be displayed properly in 3D display or full screen mode.

  • Page 107: Advanced Settings

    Screen Adjustment 3D Active Glasses from Samsung’s previous product (IR type) or other manufacturers not be  supported. When the product is initially powered on, may take some time until the 3D display is optimized.  The 3D Active Glasses may not work properly if there is any other 3D product or electronic devices ...

  • Page 108: Dynamic Contrast

    Screen Adjustment 4.6.2 Dynamic Contrast Adjust the screen contrast. Medium  4.6.3 Shadow Detail Increase the brightness of dark images. 4.6.4 Gamma Adjust the primary color intensity. 4.6.5 Expert Pattern Use the Expert Pattern function to calibrate the picture. If the OSD menu disappears or a menu other than the Picture menu is opened, the product saves the calibration and the disappears.

  • Page 109: White Balance

    Screen Adjustment 4.6.8 White Balance Adjust the colour temperature for a more natural picture. R-Offset G-Offset  R-Gain G-Gain  Reset: Resets the  4.6.9 10p White Balance (Off / On) Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness. Interval: Select interval to adjust.

  • Page 110: Picture Options

    Screen Adjustment Picture Options MENU Picture Select an option using the up and down arrow keys, and the press [ the setting, and then press [ When connecting a PC, you can only make changes to the 4.7.1 Colo(u)r Tone Cool Standard ...

  • Page 111: Mpeg Noise Filter

    Screen Adjustment 4.7.4 MPEG Noise Filter Reduces MPEG noise to provide improved picture quality. Medium  4.7.5 HDMI Black Level Lets you adjust the screen depth by selecting a black level. Normal  Available only in HDMI 4.7.6 Film Mode Sets the product to automatically sense and process film signals from all sources and adjust the picture for optimum quality.

  • Page 112: Reset Picture

    Screen Adjustment This is only supported if the Reset: Restore Motion Plus settings to default values.  The color on screen may vary with this option unintentionally.  Disabled when  Reset Picture MENU Picture Resets your current picture mode to its default settings. Auto Motion Plus Motion Plus) is set to Custom.

  • Page 113: Sound Adjustment

    Sound Adjustment Configure the sound (Sound) settings for the product. Sound Mode MENU Sound Use the up and down arrow keys to select an option, and then press [ Standard: Selects the normal sound mode.  Music: Emphasizes music over voices. ...

  • Page 114: Audio (Ue46A & Ue55A Models Only)

    Sound Adjustment SRS CS Headphone (Off  You can hear virtual 5.1ch surround sound over the headphones. Equalizer  The Equalizer displays a series of sliders. Use the up and down arrow keys to select a slider. Use the left and right arrow keys to change the slider’s value. To press [ ], then select Equalizer...

  • Page 115: Reset Sound

    Sound Adjustment Auto Volume (Off Normal  Normal equalizes the volume level on each channel, so that when you change channels, the volume level is the same. Night equalizes and decrease the volume level on each channel, so each channel is quieter. useful at night, when you may want to keep the volume low.

  • Page 116: Media

    Media MagicInfo Lite MENU Media Press the MagicInfo Lite 6.1.1 MagicInfo Lite Player Guide MagicInfo Lite Player allows you to play content (image, video, document files) at a desired time. You can play content saved in internal memory or USB memory. You can also play content via MagicInfo Lite Server after connecting to a network.

  • Page 117: Videos

    Media Videos MENU Media Connecting a USB Device Turn on your product. Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. When a USB device is connected to the product, the connected device, and then press [ 6.2.1 Playing a Video Press the...
  • Page 118 Media Supported Video Formats File Container Video Codec Extension DivX 3.11 / 4.x / 5.1 / 6.0 H.264 BP / MP / *.avi *.mkv MPEG4 SP / ASP Motion JPEG DivX 3.11 / 4.x / 5.1 / 6.0 H.264 BP / MP / *.asf MPEG4 SP / ASP Motion JPEG...
  • Page 119 Media Sound or video may not work if the contents have a standard bitrate/frame rate above the  compatible Frame/sec listed in the table above. If the Index Table is in error, the Seek (Jump) function is not supported.  You may experience file stuttering while playing a video through a network connection.
  • Page 120 Media Press the button to select a chapter you want to view. Playback will start from the chapter you selected. Media...

  • Page 121: Photos

    Media Photos MENU Media Connecting a USB Device Turn on your product. Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. When a USB device is connected to the product, the connected device, and then press [ 6.3.1 Viewing a Photo (or Slide Show) Press the...

  • Page 122: Music

    Media Music MENU Media Connecting a USB Device Turn on your product. Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. When a USB device is connected to the product, the connected device, and then press [ 6.4.1 Playing Music Press the...
  • Page 123 Media Playing My Playlist Select the My Playlist folder and it will play automatically. Press the music file within the play list. To delete a file from Playlist, select the recycle bin icon next to the file you want to delete by using the direction buttons, and then press [ Playing Selected Music Files On the...

  • Page 124: Videos / Photos / Music - Additional Functions

    Media Videos / Photos / Music - Additional Functions 6.5.1 Sorting the file lists To sort files in the file lists, select the button. Then, press the [ Sort Criteria Folder view Displays the whole folder. You can view the file name and thumbnail by selecting the folder.

  • Page 125: Videos/Photos/Music Play Option Menu

    Media 6.5.2 Videos/Photos/Music Play Option menu When playing video or photo files, you can press the Below are a series of tables listing the options available and the media each option applies to. Option Name List Return to the file list. Play Pause You can start or stop.
  • Page 126 Media Option Name Start Slide Show You can start or stop a slide show. Stop Slide Alternatively, use the Show remote. Slide Show You can select the slide show speed during Speed the slide show. Alternatively, use the ◀ ◀ button on the remote.

  • Page 127: Source

    Media Source MENU Media Source allows you to select a variety of sources and change source device names. 6.6.1 Source You can display the screen of a source device connected to the product. Select a source from Source List to display the screen of the selected source. The input source can also be changed by using the The screen may not display correctly if an incorrect source is selected for the source device you want to convert to.

  • Page 128: Information

    Media When connecting a PC to the HDMI IN  mode under Edit Name. When connecting a PC to the HDMI IN  DVI PC mode under Edit Name. When connecting an AV devices to the  product to DVI Devices mode under 6.6.3 Information MENU...

  • Page 129: Allshare

    Search with file names  And many others  To use the original DLNA functions of Samsung fully, it is recommended that you use the  AllShare™ software provided with your product. Refer to page 138 for details about the...

  • Page 130: Network

    Network Network Settings 7.1.1 Connecting to a Wired Network There are three ways to attach your product to your LAN using cable: You can attach your product to your LAN by connecting the LAN port on the back of your product to ...

  • Page 131: Wired Network Settings

    Network access the Internet so you do not have to enter them manually. Most home networks are Dynamic Networks. Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your product Cable Setup Screen when you set up the network connection.
  • Page 132 Network Manual Network Setup Use the Manual Network Setup when connecting your product to a network that requires a Static IP address. Getting the Network Connection Values To view the Network connection values on most Windows computers, follow these steps. Right click the Network icon on the bottom right of the screen.

  • Page 133: Connecting To A Wireless Network

    Network 7.1.3 Connecting to a Wireless Network To connect your product to your wireless network, you need a wireless router or modem and a Samsung Wireless LAN adapter (WIS09ABGN, WIS09ABGN2 or WIS10ABGN - sold separately), which you connect to your product back or side panel USB port. See the illustration below.

  • Page 134: Wireless Network Setting

     One Foot Connection  The product may not recognize the Samsung Wireless LAN adapter if you connect it to the  product with a USB hub or USB extension cable other than the cable supplied with the product. 7.1.4 Wireless Network Setting...
  • Page 135 Network If you want to set up the connection manually, select  section, “How to set up manually”. Manual Network Setup Use the Manual Network Setup address or if the automatic connection process has failed. Getting the Network Connection Values To view the Network connection values on most Windows computers, follow these steps: Right click the Network icon on the bottom right of the screen.

  • Page 136: Wps(Pbc)

    ], and then press [ ] again. button on your router within 2 minutes. Your product automatically acquires all function lets you connect your Samsung product automatically to a Samsung One Foot One Foot Connection screen. ], then press [ Server.

  • Page 137: Ad Hoc Network Setup

    This Priority QOS function is unique to Samsung wireless routers. You can connect a Samsung wireless router to many devices, such as laptops, mobile phones, BD players etc. But, when you connect a Samsung product to a Samsung wireless router, the Samsung wireless router gives the Samsung product a priority connection.

  • Page 138: Network Status

    Network If a device is connected once, it is displayed in the Network Setting list. When you connect to  it again, you can find it in the list. Network Status MENU Network You can check the current network and Internet status. AllShare Settings MENU Network...

  • Page 139: Magicinfo Lite Settings

    Network Delete: Deletes the devices from the list.  This function only deletes the name of the device from the list. If the deleted device is turned on or tries to connect to the product, it may appear on the list again. Using the Media Function An alarm window appears informing you that media contents (videos, photos, music) sent from a mobile phone will be displayed on your product.
  • Page 140 Network Internal Memory: Displays the space currently being used or deletes all content.  USB: Displays the space currently being used.  Slideshow Image Viewer Time: Sets the time length you want to display images played from  Schedule or by one of the auto playback functions. PPT Viewer Time: Sets the time length you want to display each page of a document file ...

  • Page 141: System

    System Multi Control MENU System Assign an individual ID to your product. 8.1.1 Configuring settings for Multi Control MDC Connection  Select a method to connect to MDC to receive the MDC signal. RS232C MDC  Communicate with MDC via the RS232C-stereo cable. RJ45 MDC ...

  • Page 142: Time

    System Time MENU System You can configure Clock Set at a specified time using the 8.2.1 Clock set Set the clock to use the various various timer features of the product. If you disconnect the power cord, you have to set the clock again. Changing the Setting for Clock Clock Set ...

  • Page 143: Off Timer

    System The check mark indicates days you’ve selected. Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to  enter numbers. Use the left and right arrow buttons to change entry fields. Volume: Set the desired volume level.

  • Page 144: Menu Language

    System Delete: Delete all items from the list of holidays. Select Delete. The message Select Yes. All holidays will be deleted. Apply: Set the On Timer  Press ENTER[  The selected On Timer  To create a holiday that starts at the end of a year and finishes at the beginning of the following year, the date must be set as shown below.

  • Page 145: Eco Solution

    System Eco Solution MENU System 8.4.1 Energy Saving Save power with the Energy Saving While Energy Saving mode is active, the product power consumption will be controlled to save power. Medium  8.4.2 Eco Sensor (Off / On) To enhance your power savings, the picture settings will automatically adapt to the light in the room. If you adjust Backlight Min.

  • Page 146: No Signal Power Off

    System 8.4.3 No Signal Power Off To avoid unnecessary energy consumption, you can set how long you want the product to remain on if it’s not receiving a signal. 15 min. 30 min.  Disabled when an attached PC is in power saving mode. ...

  • Page 147: Change Pin

    System 8.5.3 Change PIN Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in enter the same 4 digits in button. The product has memorized your new PIN. MENU System If you have set ...

  • Page 148: Auto Protection Time

    System Auto Protection Time MENU System If the screen displays a still image for a certain period of time you define, the product activates the screen saver to prevent the formation of burnt in ghost images on the screen. 2 hours 4 hours ...

  • Page 149: Screen Burn Protection

    System Screen Burn Protection MENU System To reduce the possibility of screen burn, this unit is equipped with technology. Pixel Shift moves the picture slightly on the screen. The to program the time between movements of the picture in minutes. 8.8.1 Pixel Shift To prevent after-images on the screen, you can use this function to have pixels move on the LCD in the horizontal or vertical direction.

  • Page 150: Pixel

    System Mode: You can change the  Period: Use this function to set the execution period for each mode set in the timer.  Time: Within the set period of time specify a time for execution.  8.8.3 Pixel This function prevents after-images by moving many pixels on the screen. 8.8.4 Side Gray Select the brightness of the grey for the screen background.

  • Page 151: Video Wall

    System Video Wall MENU System Customize the layout of multiple displays that are connected to form a video wall. In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays. To display multiple images, refer to MDC Help or the MagicInfo user guide.

  • Page 152: Vertical

    System according to the number entered. A maximum of 15 displays can be assigned to the horizontal arrangement. The screen can be divided into a maximum of 100 screens (horizontal and vertical screens  multiplied). For example, if the horizontal arrangement is set to 15, a maximum of 6 displays can be assigned to the vertical arrangement.

  • Page 153: Source Autoswitch Settings

    System 8.10 Source AutoSwitch Settings MENU System Turning on the display with  active, the display will automatically search the different video input sources for active video. Source AutoSwitch  When the Source AutoSwitch active video. Primary Source Secondary Source selection will become active, if no primary video source is available.

  • Page 154: General

    System 8.11 General MENU System 8.11.1 Max. Power Saving Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time. 8.11.2 Game Mode When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode.

  • Page 155: Bd Wise

    System 8.11.3 BD Wise Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theater products which support Wise. When BD Wise optimal resolution. Available when you connect Samsung products that support product. 8.11.4 Auto Power Enabling this option will automatically power on the product if the power cable is connected.

  • Page 156: Power On Adjustment

    System 8.11.8 Power On Adjustment You can set the warm-up time for the screen to turn on after the power button is pressed. (Range: 0 – 50 seconds) A warm-up time that is too short may damage the product due to overvoltage. 8.11.9 Temperature Control Temperature Control ...

  • Page 157: Anynet+(Hdmi-Cec)

    Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.

  • Page 158: Auto Turn Off

    System Anynet+ Menu (device_name) Tools (device_name) Title Menu 8.12.2 Auto Turn Off Setting an Anynet+ Device to turn Off automatically when the product is turned off. The active source on the product remote must be set to product to use the Auto Turn Off to Yes, connected external devices are also turned off when the product is turned off.
  • Page 159 System Listening through a Receiver You can listen to sound through a receiver (i.e Home Theater) instead of the Select Receiver and set to On. Press the EXIT button to exit. If your receiver supports audio only, it may not appear in the device list. ...

  • Page 160: Receiver

    System Problem The connected device is not displayed. The product sound is not output through the receiver. 8.12.3 Receiver Sound is played through the receiver. Possible Solution Check whether or not the device supports Anynet+ functions.  Check whether or not the HDMI cable is properly connected. ...

  • Page 161: Divx® Video On Demand

    8.14 Network Remote Control MENU System Turn on/off or give permission to Samsung mobile phone devices to connect with and control the product. You must have a Samsung Mobile phone/device which supports Wireless Remote Control. For more details, refer to each device’s manual.

  • Page 162: Support

    9.1.1 By USB To upgrade by USB, follow these steps: Visit www.samsung.com. Download the latest USB software upgrade exe archive to your computer. Extracts the exe archive to your computer. You should have a single folder with the same name as the exe file.

  • Page 163: Contact Samsung

    Support Contact Samsung MENU Support Contact Samsung ENTER View this information when your product does not work properly or when you want to upgrade the software. You can find information regarding our call centers and how to download products and software.

  • Page 164: Magicinfo Lite

    MagicInfo Lite 10.1 File Formats Compatible with MagicInfo Lite Player [Read before using MagicInfo Lite Supported USB-device file systems include FAT16 and FAT32. (NTFS is not supported.)  A file with a vertical and horizontal resolution larger than the maximum resolution cannot be ...
  • Page 165 MagicInfo Lite File Container Extension *.3gp 3GPP *.vro *.mpg *.mpeg *.ts *.tp *.trp Video Video content without audio is not supported.  3D video is not supported.  Content with a resolution larger than the resolution specified in the table above is not supported. ...
  • Page 166 MagicInfo Lite Image Compatible image file format : Jpeg  Supported maximum resolution : 15,360 x 8640  Supported image effects : 8 effects (Fade1, Fade2, Blind, Spiral, Checker, Linear, Stairs, Wipe)  Flash Compatible with Flash 10.1  Flash Animation ...
  • Page 167 MagicInfo Lite Power Point Compatible document file formats  Extension : ppt, pptx  Version : Office 97 ~ Office 2007  Functions not supported  Animation effect  3D shapes (which will be displayed in 2D)  Header and footer (some subitems are not supported) ...

  • Page 168: Network Schedule

    MagicInfo Lite 10.2 Network Schedule 10.2.1 Connecting to a server To use the MagicInfo Lite To use local schedules and set using the remote control. Network setup To run MagicInfo Lite, connect to a network. Refer to 130 page for details about the Server setup Go to MENU...

  • Page 169: Magicinfo Lite Settings

    MagicInfo Lite 10.2.2 MagicInfo Lite Settings MENU Media Press the MagicInfo Lite You can view whether the server is connected (approval) in the whether the server is connected when a network schedule is running, press Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Internal AutoPlay USB AutoPlay...
  • Page 170 MagicInfo Lite Select Device from the top menu bar. Select Lite Device from the menus on the left. 10 MagicInfo Lite...
  • Page 171 MagicInfo Lite Select View Unapproved Lite Device Select the Approve Pressing the details of the schedule. Check that the correct device has been selected by viewing the device ID in the details. Enter the information required to approve the device. Device Name: Enter the device name.
  • Page 172 MagicInfo Lite Select the View All Lite Device When the device is approved by the server, the schedule registered in the selected group will be downloaded to the device. The schedule will run after it is downloaded. For further details on how to configure a schedule, refer to the <MagicInfo server user's manual>. ...

  • Page 173: Setting The Current Time

    MagicInfo Lite 10.2.4 Setting the current time A schedule may not run if the time set on the device is different from the server's current time. Go to the tabs Device Select your device. Select Clock Set, and sync the time with the server. For further details on how to manage the time (scheduling, holiday management, etc.), refer to the <MagicInfo server user's manual>.

  • Page 174: Local Schedule

    MagicInfo Lite 10.3 Local Schedule Run a schedule created by Go to Local Schedule Manager This menu is disabled if no schedule was created by Select Local Schedule Manager Run a schedule created by local schedule. 10.4 Local Schedule Manager Configure the settings for playback from internal or USB memory according to the customized playback sequence.
  • Page 175 MagicInfo Lite Select Create in the Storage No Playing Schedule Select Time to set the time you want to play content. To create a schedule that starts on one day and finishes the next day, the time must be set as shown below.
  • Page 176 MagicInfo Lite Select Contents to specify the content you want to play. Internal Memory No Item Select Save. Select the memory space you want to save the content to. Time 12:00 am ~ 02:00 pm Conten Time Conten Internal Check that the schedule has been added to the Local Schedule Manager. Storage No Playing Schedule 20110101_1200.Isch...

  • Page 177: Modifying A Local Schedule Local Schedule

    MagicInfo Lite 10.4.2 Modifying a local schedule Local Schedule Ensure at least one local schedule Select Local Schedule Manager Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Internal AutoPlay USB AutoPlay Mode Network Schedule Select the local schedule you want to modify. Storage No Playing Schedule 20110101_1200.Isch...

  • Page 178: Deleting A Local Schedule Local Schedule

    MagicInfo Lite Select Edit. Time 12:00 am ~ 02:00 pm Contents Time Contents Change the details of the local schedule. Next, select Save. 10.4.3 Deleting a local schedule Local Schedule Ensure at least one local schedule Select Local Schedule Manager Network Schedule Local Schedule ・...
  • Page 179 MagicInfo Lite Select the local schedule you want to delete. Storage No Playing Schedule 20110101_1200.Isch Select Delete. Storage Local Schedule Manager Internal Memory Local Schedule Manager Internal Memory Do you want to delete schedule? Create Edit Delete Info Close Create Edit elete Info...

  • Page 180: Running A Local Schedule Local Schedule

    MagicInfo Lite 10.4.4 Running a local schedule Local Schedule Ensure at least one local schedule Select Local Schedule Manager Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Internal AutoPlay USB AutoPlay Mode Network Schedule Select the local schedule you want to run. Next, select Run. Storage No Playing Schedule 20110101_1200.Isch...

  • Page 181: Stopping A Local Schedule Local Schedule

    MagicInfo Lite 10.4.5 Stopping a local schedule Local Schedule This function is enabled only when a schedule is running. mode from local schedule to network schedule. Select Local Schedule Manager Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Internal AutoPlay USB AutoPlay Mode...

  • Page 182: Viewing The Details Of A Local Schedule Local Schedule

    MagicInfo Lite 10.4.6 Viewing the details of a local schedule Local Schedule Select Local Schedule Manager Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Internal AutoPlay USB AutoPlay Mode Network Schedule Select the local schedule you want to view the details of. Storage No Playing Schedule 20110101_1200.Isch...

  • Page 183: Copying Content

    MagicInfo Lite 10.5 Contents Manager 10.5.1 Copying content Select Contents Manager Network Schedule Local Schedule · Local Schedule Manager Contents Manager Internal AutoPlay USB AutoPlay Mode Network Schedule Select the content you want to copy. If content under  Memory If content under ...

  • Page 184: Deleting Content

    MagicInfo Lite 10.5.2 Deleting content Select Contents Manager Network Schedule Local Schedule · Local Schedule Manager Contents Manager Internal AutoPlay USB AutoPlay Mode Network Schedule Select the content you want to delete. Content under  Internal Memory No Item Select Delete. Internal Memory No Item in the...

  • Page 185: Internal Autoplay

    MagicInfo Lite 10.6 Internal AutoPlay 10.6.1 Running Internal AutoPlay Ensure at least one content item exists under Select Internal AutoPlay Play content, which has been copied to  Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Internal AutoPlay USB AutoPlay Mode Network Schedule...

  • Page 186: When Content Is Running

    MagicInfo Lite USB AutoPlay  Local Schedule Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Internal AutoPlay USB AutoPlay Mode Network Schedule 10.8 When Content is Running 10.8.1 Viewing the details of the content that is running Press the INFO button on the remote control.

  • Page 187: Changing The Settings For The Content That Is Running

    MagicInfo Lite Schedule Download: Displays the progress of a network schedule being downloaded from the server. Software Version Device Name Device ID Mode Server Schedule Download 10.8.2 Changing the settings for the content that is running Press the TOOLS You can change the Picture Mode Remove USB) while content is playing by pressing the...

  • Page 188: Troubleshooting Guide

    11.1 Requirements Before Contacting Samsung Customer Service Center 11.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function.

  • Page 189: Check The Followings

    Troubleshooting Guide 11.1.3 Check the followings. The screen keeps switching on and off. Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product and PC. The power LED is off. The screen will not switch on.
  • Page 190 Troubleshooting Guide The screen is not clear. The screen is blurry. The screen appears unstable and shaky. There are shadows or ghost images left on the screen. The screen is too bright. The screen is too dark. Screen color is inconsistent. The colors on the screen have a shadow and are distorted.
  • Page 191 Troubleshooting Guide The remote control does not work. A beeping sound is heard when my PC is booting. Remote control issue Make sure that the batteries are correctly in place (+/-). Check if the batteries are flat. Check for power failure. Make sure that the power cord is connected.
  • Page 192 Troubleshooting Guide 11.2 Q & A Question How can I change the frequency? Answer Set the frequency on your graphics card. "Windows XP": Go to Control Panel  Themes Display Settings Monitor and adjust the frequency in Monitor Settings. "Windows ME/2000": Go to Control Panel ...
  • Page 193 Troubleshooting Guide Question How can I change the resolution? How do I set power-saving mode? Refer to the user manual for your PC or graphics card for further instructions on adjustment. Answer "Windows XP": Go to Control Panel  Themes Display Settings and adjust the resolution.

  • Page 194: Specifications

    Specifications 12.1 General Model Name Size Panel Display area Display Color Dimensions (W x H x D) / Weight (without stand) VESA Mounting Interface Model Name Size Panel Display area Display Color Dimensions (W x H x D) / Weight (without stand) VESA Mounting Interface Horizontal...
  • Page 195 Hereby, Samsung Electronics, declares that this Monitor is in compliance with the essential  requirements and other relevant provisions of Directive 1999/5/EC. The official Declaration of Conformity may be found at http://www.samsung.com, go to Support >  Search Product Support and enter the model name.

  • Page 196: Powersaver

    Specifications 12.2 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse.

  • Page 197: Preset Timing Modes

    Specifications 12.3 Preset Timing Modes This product can be set to only one resolution for each screen size to obtain the optimum picture  quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality.
  • Page 198 Specifications Resolution VESA, 1280 x 960 VESA, 1280 x 1024 VESA, 1280 x 1024 VESA, 1360 x 768 VESA,1920 x 1080 VESA,1920 x 1080 Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle.

  • Page 199: License

    Specifications 12.4 License TheaterSound HD, SRS and TheaterSound HD technology is incorporated under license form SRS Lab, Inc. Manufactured under license from Dolby Laboratories. Dolby and the double- D symbol aretrademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380;...

  • Page 200: Appendix

    Appendix Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Appendix...
  • Page 201 00-1800-5077267 PANAMA 800-7267 PERU 0-800-777-08 PUERTO RICO 1-800-682-3180 TRINIDAD & TOBAGO 1-800-SAMSUNG (726-7864) VENEZUELA 0-800-100-5303 ALBANIA 42 27 5755 AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) BELGIUM 02-201-24-18 NORTH AMERICA http://www.samsung.com http://www.samsung.com/ca http://www.samsung.com/ch_fr (French) http://www.samsung.com LATIN AMERICA http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com...
  • Page 202 BULGARIA 07001 33 11 CROATIA 062 SAMSUNG (062 726 7864) CZECH 800 - SAMSUNG (800-726786) Samsung Electronics Czech and Slovak, s.r.o., Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8 DENMARK 70 70 19 70 FINLAND 030 - 6227 515 FRANCE...
  • Page 203 Appendix SPAIN 902 - 1 - SAMSUNG (902 172 678) SWEDEN 0771 726 7864 (SAMSUNG) SWITZERLAND 0848-SAMSUNG (7267864, CHF 0.08/min) 0330 SAMSUNG (7267864) EIRE 0818 717100 LITHUANIA 8-800-77777 LATVIA 8000-7267 ESTONIA 800-7267 TURKEY 444 77 11 RUSSIA 8-800-555-55-55 GEORGIA 8-800-555-555...
  • Page 204 1800 1100 11 3030 8282 1800 3000 8282 1800 266 8282 INDONESIA 0800-112-8888 021-5699-7777 JAPAN 0120-327-527 MALAYSIA 1800-88-9999 PHILIPPINES 1-800-10-SAMSUNG (726-7864) for PLDT 1-800-3-SAMSUNG (726-7864) for Digitel 1-800-8-SAMSUNG (726-7864) for Globe 02-5805777 SINGAPORE 1800-SAMSUNG (726-7864) THAILAND 1800-29-3232 02-689-3232 TAIWAN 0800-329-999 0266-026-066 VIETNAM...
  • Page 205 Appendix GHANA 0800-10077 0302-200077 KENYA 0800 724 000 NIGERIA 0800-726-7864 SENEGAL 800-00-0077 SOUTH AFRICA 0860-SAMSUNG (726-7864) TANZANIA 0685 88 99 00 UGANDA 0800 300 300 AFRICA http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com Appendix...

  • Page 206: Optimum Picture Quality And Afterimage Burn-In Prevention

    Appendix Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality To enjoy the optimum picture quality, go to Control Panel on your PC and adjust the resolution and  refresh rate as follows. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.

  • Page 207: Prevention Of Afterimage Burn-In

    Appendix Prevention of Afterimage Burn-in What is afterimage burn-in? Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period of time (more than 12 hours), a slight voltage difference may occur between the electrodes in pixels that control the liquid crystals.
  • Page 208 Appendix Powering Off, Screen Saver and Power Saving Mode  Power off the product for 4 hours after using it for 20 hours. (DE40A / DE46A / DE55A)  Power off the product for 2 hours after using it for 12 hours. (ME40A / ME46A / ME55A / UE46A ...
  • Page 209 Appendix The best way to protect the product from afterimage burn-in is switching the power off or  setting the PC or system to run a screen saver when not in use. Also, Warranty service may be limited depending on instruction guide. Appendix...

  • Page 210: Correct Disposal Of This Product (Waste Electrical & Electronic Equipment) - Europe Only

    Appendix Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.

  • Page 211: Terminology

    Appendix Terminology OSD(On Screen Display) On screen display (OSD) allows you to configure on-screen settings to optimize the picture quality as required. It allows you to change the screen brightness, tint, size and many other settings using menus displayed on the screen. Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen.
  • Page 212 Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g.
  • Page 213 Index Numerics 3D Mode Appendix Batteries Changing the Resolution Communicate with MDC via the RS232C- stereo cable. Contact SAMSUNG WORLDWIDE Custom settings screen Eco Solution Energy Saving Items sold separately MagicInfo Lite MDC InstallationUninstallation Menu Language Mode Multi Control Network Settings...

This manual is also suitable for:

Me55aDe46aDe55aMe40aMe46aUe46a ... Show all

Table of Contents