Id Settings; Device Id; Device Id Auto Set; Pc Connection Cable - Samsung DBJ User Manual

ID Settings

HOME → ID Settings → ENTER E
ID Settings
– The displayed image may differ depending on the model.
Assign an ID to a set.

Device ID

Enter the ID number of the product connected to the input cable for input signal reception. (Range: 0~224)
― Press u/d to select a number, and press E.
― Enter the number you want using the number buttons on the remote control.

Device ID Auto Set

This feature automatically allots an ID number to a device connected via an RS232C cable.
When multiple devices are connected, enable the feature on either the first or last device.
― This function is only available on the first device within an RS-232C daisy chain.

PC Connection Cable

Select a method to connect to MDC to receive the MDC signal.
• RS232C cable
Communicate with MDC via the RS232C-stereo cable.
• RJ-45 (LAN)/Wi-Fi Network
Communicate with MDC via the RJ45 cable.
68