Picture Options; Color Tone; Hdmi Black Level; Dynamic Backlight - Samsung UH46N-E User Manual

Picture Options

MENU m → Picture → Picture Options
Picture Mode Picture Mode
settings
Shop & Mall, Office & School, Video/Image
Terminal & Station, Video Wall
Text
Calibration

Color Tone

If Picture Mode is set to Text.
• Off / Cool / Standard / Warm
If Picture Mode is set to Video/Image.
• Off / Cool / Standard / Warm1 / Warm2
― If
Picture Mode is set to Calibration,
― Settings can be adjusted and stored for each external device connected to an input on the
product.

HDMI Black Level

Selects the black level on the screen to adjust the screen depth.
• Low / Normal
― This option is not available if the input source is set to PC.
→ ENTER E
Adjustable options
Color Tone / HDMI Black Level

Dynamic Backlight

Color Tone / HDMI Black Level
Dynamic Backlight
Dynamic Backlight
Color Tone is disabled.
Dynamic Backlight
Automatically adjust the backlight to provide the best possible screen contrast under the
current conditions.
• Off / On
― The
Dynamic Backlight
is On.
/

UHD COLOR

/ UHD COLOR
/ • HDMI1 : Off
/ UHD COLOR
• HDMI2 : Off
• DisplayPort
/ UHD COLOR
― To enable a UHD input source, set
― If monitors are connected through Loopout when a UHD resolution is in use, set
COLOR to On
― A maximum of 25 monitors can be connected through Loopout when using UHD resolution.
― To use
UHD COLOR
HDMI 2.0 is recommended. Make sure that the cable is shorter than 2m.
― Switching
UHD COLOR
― If the HDMI/DP connector with
support UHD content, the device may not operate properly. Connect a device that supports
UHD content.
is not available when the input source is set to
/ On
/ On
: Off / On
UHD COLOR to On.
on all monitors.
mode over an HDMI cable, using an HDMI cable that is compatible with
between On and Off takes some time.
UHD COLOR enabled is connected to a device that does not
PC while Video Wall
UHD
59