Spirometry Settings" Menu Tree - Welch Allyn CP 200 Directions For Use Manual

12 Chapter 2 Reviewing the Spirometry Settings

"Spirometry Settings" Menu Tree

Operation
Settings
Select Protocol
Select Adult Predictive Norm
Select Ped. Predictive Norm
Select Best Effort Formula
Select FVC Reversibility Formula
Select FEV1% Formula
Enable Predictive Points
Enable Predictive Curve
Enable ATS Interp. Results
Enable Composite Norm Values
Settings
Select Efforts
Select FVC Curves
Select FVC Print Parameters
Select Scale
Print Lung Age
Print "Unconfirmed Report"
Print "Reviewed By"
Print "Patient Cooperation"
Print Quality Grades
Print Patient Education
Print Physician's Comments
Auto Print
Note:
As part of spirometry setup, you can also go to the System Settings > Device Configuration menu
and select the following spirometry-related units of measure.
• Flow: L/sec or L/min (units for the y-axis on flow/volume curves)
• Pressure: mmHg, mbar, inHg, kPa (units for the calibration menu's atmospheric pressure values)
• Temperature: Fahrenheit or Celsius (units for the calibration menu's temperature values)
For details, see the electrocardiograph manual.
Spirometry
Settings
Calibration
Settings
Calibrate Spirometer
Enable Auto Calibration Report
Print Calibration Report
Print
Welch Allyn CP 200 Spirometry Option
Screen
Settings
Select Default FVC Curve
Select FVC Display Parameters
Patient Data
Settings
First Name
Second Last Name
Middle Initial
Age/Birth Date
Weight
Smoke Years
Packs/Day
Medication
History
Comments
Edit
Interpretation
List