Table of Contents
Advertisement
Max
0.800
Min
0.000
In
0.389
1.168
Value mV/V. This calibration option is available only for strain-gauge sensors
and it is basing on the setting of correct ratio mV/V for the sensor. Process
value will be calculated considering both the entered ratio mV/V and the
effective mV/V value detected by the analog input.
Out
2.000
Range
6.000 kg
Out
2.000
Range
6.000
In
0.389
1.168
For the calibration procedure refer to the following table:
Press
1
kg
kg
mV/V
%
kg
Esc
mV/V
OK
mV/V
kg
mV/V
mV
kg
Esc
Display
Press " m " to calibrate lower limit and " n " to
for the upper limit. Press "◊%" to go back to
calibration percentage.
Use the arrow keys to set the correct mV/V
ratio of strain gauge. Press "Ok" to confirm.
Press "◊mV" to go back to setting of mV/V
ratio.
Place sensor on its minimum
operating position (related to
Lower limit calibration).
Do
User manual - DP400S -
17
Advertisement
Table of Contents
