Vocera T1000 User Manual page 54

Training the Genie
When you train the Genie to learn the way you say commands, the Genie
prompts you to record a short list of the most common commands, as well as
keywords such as Yes, No, and the numbers zero through nine. You can press
the Call button to skip through commands in the list, or you can quit at any
time by pressing the Hold/DND button. When you quit, the Genie remembers
the commands it has already learned, and it gives you the option to skip these
commands if you continue some other time.
To train the Genie to learn commands:
If you use Learn Commands again at a later time, the Genie can automatically
skip commands it has already learned. The Genie also lets you manually
skip through the command list so you can re-record specific commands. For
example, if the Genie didn't learn certain commands properly during a previous
training session, you can rerecord just those specific commands.
To train the Genie again:
54 ··· Vocera User Guide
The Genie asks you to repeat the name several times, then tells you, "OK,
I've learned the name".
1. Press the Call button, wait for the Genie to answer, and then say "Learn
commands."
The Genie reminds you that it will take a few minutes to learn commands,
and then it prompts you to speak the first command.
2. Do either of the following:
• Say the name of the command the way you always do.
The Genie asks you to repeat the command several times, then prompts
you to speak the next command.
• Press the Call button.
The Genie skips that command and prompts you to speak the next
command.
3. Continue through the list by saying each command to train the Genie or
skipping it with the Call button.
4. Quit at any time by pressing the Hold/DND button.
The Genie tells you it is quitting and remembers the commands it has
learned.
1. Press the Call button, wait for the Genie to answer, and then say "Learn
commands."