Vocera T1000 User Manual page 17

The badge will begin a startup sequence. Wait until the badge display reads
Logged Out or shows someone's name.
4. Put the badge on, and make sure it is in the proper position.
To get the best possible speech recognition, the microphone on the top of
the badge should point toward your mouth and should be 6 to 8 inches (15
to 20 centimeters) from your mouth.
Figure 3. Proper ways to wear the badge
5. Log in: Press the Call button and wait for the Genie to answer.
• If the Genie asks for your name, say your first and last names.
• If the Genie answers by saying "Vocera" or by playing a tone, say
"Log me in as your first and last name" (for example, "Log me in as John
Smith").
6. Record your name: Press the Call button, wait for the Genie to answer, and
then say "Record my name."
The Genie will prompt you to record your name. If you do not record your
name, the Vocera system uses speech synthesis to say your name.
7. Adjust the volume on the badge, if necessary. (See
on page 31).
Your badge is now ready to use. You can press the Call button at any time, wait
for the Genie to answer, and then give the Genie a voice command, such as:
"Call Jim Olsen."
"Record my greeting."
"Play my messages."
For more information about Vocera commands, see
page 47 and Advanced Commands
Getting Started with a Badge
Adjusting the Volume
Basic Calling
on page 71.
Welcome to Vocera ··· 17
on