Anti-Microbial Protection; Protective Sleeves - Vocera T1000 User Manual

Note: The Hold/DND button has a yellow indicator light that blinks to remind
you that a call is on hold or that you have put the badge in Do Not Disturb
mode.

Anti-Microbial Protection

Most exterior surfaces of the B2000 badge incorporate an antimicrobial additive
from BioCote® to inhibit the growth of bacteria, mold, and fungi. This additive
is molded into the badge material, and you cannot wear it off or remove it by
scratching the badge.
A topical solution, also from BioCote, is applied to the buttons and the plastic
display screen of the B2000 badge. The battery compartment, the inner surface
of the battery, and the microphone screen do not incorporate antimicrobial
protection.
The BioCote additive is also molded into the material for all colors of the
protective sleeve except black. See

Protective Sleeves

The protective sleeve safeguards the badge from everyday wear and tear and
helps to extend its life. You can change batteries, operate buttons, and view the
display screen without removing the sleeve. You must remove the sleeve before
placing the badge in the charger.
Figure 21. Badge protective sleeves
Anti-Microbial Protection
Protective Sleeves on page 33.
Badge Features ··· 33