Figure 34. Removing the battery
2. Insert the battery into the charger, making sure the battery label points
toward the middle of the charger slot.
Figure 35. Inserting the battery into the charger
The green indicator light on the top of the charger will begin to blink when
the battery is positioned correctly, and it will continue to blink while the
battery is charging. When the indicator glows steadily, the battery is fully
charged. Charging normally takes only a few hours.
3. Remove the battery from the charger.
4. Slide the holes in the top of the battery over the small pegs in the badge's
battery compartment.
Charging the Battery Without the Badge
Maintaining Your Badge ··· 121