Setting Spool Pins; Adjust The Pressure Foot Lever; Thread Cutter - Kenmore 385. 19601 Owner's Manual

SECTION 2, PREPARE YOUR MACHINE FOR SEWING
Setting Spoof Pins
The spool p_ns are used for holding [he spools of
thread when teeding thread to the machine.
To use, pull up the spool pros. Be sere to place
the spool lett on the pins. Push down for
storage,
e Adjust the Presser Foot Lever
The Presser Foot Lever raises and lowers your presser
foot.
You can rinse _t about 1/4 °' higher than the normal
up position for easy removal ot the presser toot or to
help you place heavy tabr=cs under the presser too{.
Thread Cutter
You don't need _ palr o| $_ssots Io
CUt lhe
thread after you _in_sh sewing, Just use the
handy thread cutter.
The threads are cut l|le proper length for starting
the next seam.