4
4.1
4.1.1
Use the tripod
4.1.2
BLK360 setup step-
by-step
20
Operation
Instrument Setup
General Information
The instrument should always be set up on its floor stand or tripod. Using the
tripod specified for the scanning system guarantees maximum stability during
scanning operations.
☞
Do not set up the instrument directly on the ground without the floor
stand or tripod connected.
☞
It is always recommended to shield the instrument from direct sun-
light and avoid uneven temperatures around the instrument.
Tripod Setup
1
013458_001
Step
1.
2.
3.
4.
3
2
Description
Unfold the tripod and extend the tripod legs to allow
for a comfortable working posture.
Tighten the screws at the bottom of the legs and
expand the legs for a stable tripod position.
Place the tripod adapter on the tripod and secure it.
Place the instrument on the tripod adapter and secure
it.
4
Operation