Perkins 403F-E17T 404F-E22T Operation And Maintenance Manual page 31

SEBU9075-03
Illustration 26
(A) Exhaust valves
(B) Inlet valves
Table 1
403F-E17T Engine Specifications
Maximum Operating Speed
(rpm)
Cylinders and Arrangement
Bore
Stroke
Displacement
Aspiration
Compression Ratio
Firing Order
Rotation that is viewed from the
flywheel
Valve Lash Setting (Inlet)
Valve Lash Setting (Exhaust)
Four Cylinder Engine 404F-E22T
and 404F-E22TA
Two variants of Perkins 404F-E22T and 404F-E22TA
industrial engine are available, the turbocharged
engine and the turbocharged charge cooled engine.
Both engine variants have a Diesel Oxidation
Catalyst (DOC) aftertreatment system. The DOC
aftertreatment system does not require a service
interval. Both engine variants are electronically
governed.
The 404F-E22T and 404F-E22TA industrial engines
have the following characteristics.
• In-line 4 cylinder
• 4 stroke cycle
g00852304
2800 RPM
In-Line three cylinder engine
84 mm (3.31 inch)
100 mm (3.94 inch)
3
1.66 L (101.3 in )
Turbocharged
18:1
1-2-3
Counterclockwise
0.20 mm (0.008 inch)
0.20 mm (0.008 inch)
• Two valves per cylinder
• DOC aftertreatment
Illustration 27
(A) Exhaust valves
(B) Inlet valves
The 404F-E22T and 404F-E22TA engines may be
supplied with a throttle control valve and
temperatures sensors in the DOC or without these
components installed. The difference will be due to
the evolution of engine design.
Table 2
404F-E22T and 404F-E22TA Industrial Engines
Bore
Stroke
Displacement
Compression Ratio
Aspiration
Valve Lash Setting (Inlet)
Valve Lash Setting (Exhaust)
Firing Order
Rotation (flywheel end)
Electronic Engine Features
The engine operating conditions are monitored. The
Electronic Control Module (ECM) controls the
response of the engine to these conditions and to the
demands of the operator. These conditions and
operator demands determine the precise control of
fuel injection by the ECM. The electronic engine
control system provides the following features:
• Engine monitoring
• Engine speed governing
• Injection timing control
Product Information Section
Product Description
g00296424
84 mm (3.307 inch)
100 mm (3.937 inch)
2.216 L (135.22861 cubic inch)
18: 1
Turbocharged and Turbo-
charged charge/air cooled
0.20 mm (0.008 inch)
0.20 mm (0.008 inch)
1-3-4-2
Counterclockwise
31