JVC HX-Z1R Service Manual page 8

www.freeservicemanuals.info
HX-Z1R
Removing the antenna board
Prior to performing the following procedure, remove
the metal cover.
REFERENCE: There is no need to remove the CD
changer mechanism assembly.
1. Disconnect the card wire from connector CN1 on the
antenna board on the right side of the body.
2. Remove the band attaching the antenna board.
3. Remove the two screws F on the rear panel on the
back of the body.
1-8
(See Fig.10, 11)
Digitized in Heiloo Netherlands
Antenna board
CN1
Band
Fig.10
Rear panel
F
Fig.11
3/29/2018
Rear panel