JVC HX-Z1R Service Manual page 23

www.freeservicemanuals.info
Removing the flywheel
1. Remove the head amplifier & mechanism control P.C.
board.
2. Remove the main motor assembly.
3. After turning over the cassette mechanism, remove
the two slit washers and fixing the capstan shafts R
and L, and pull out the flywheel (R) and (L)
respectively from behind the cassette mechanism.
Flywheel R
Removing the reel pulse P.C. board and
solenoid
1. Remove the five pawls a to e reattaining the reel
pulse board.
2. From the surface of the reel pulse board parts,
remove the two pawls f and g retaining the solenoid.
Solenoid
(See Fig. 7, 8)
Flywheel L
Fig. 8
(See Fig. 9)
a
g
f
Digitized in Heiloo Netherlands
Flywheel (R)
Capstan shaft (R)
Slit washer
b c d e
Fig. 9
Flywheel (L)
Capstan shaft (L)
Slit washer
Fig. 7
Reel pulse board
3/29/2018
HX-Z1R
1-23