www.freeservicemanuals.info
HX-Z1R
Removing the fan assembly
Prior to performing the following procedure, remove
the metal cover and the CD changer mechanism
assembly and the rear panel.
1.
Remove two screws G on the rear panel.
2.
Rotate fan assembly in clockwise direction to release
fan assembly from rear panel (joint d).
Removing the main board
Prior to performing the following procedure, remove
the metal cover, the CD changer mechanism
assembly, the antenna board and the rear panel.
1.
Disconnect the card wire from connector CN44 and
CN870 on the main board.
2.
Remove the screw D attaching the board.
3.
Disconnect connector CN217 and CN311 on the
main board outward and release from the base
chassis (joint e) upward.
1-10
(See Fig.18, 19)
Fan assembly
(See Fig.20)
Main board
Digitized in Heiloo Netherlands
Fig.18
Joint d
Joint d
Fig.19
CN870
CN44
D
CN311
Fig.20
G
Rear panel
CN217
Joint e
3/29/2018