Amprobe TMA-21HW User Manual page 13

Temperature & Air Flow Display :
2/3V MAX : 2/3V Maximum mode is selected indication.
m : s : minute : second
AVG : Average mode is selected indication.
: Current mode is selected indication.
WET : Wet bulb temperature indication.
WCT : Wind chill temperature indication.
HD : Humidex temperature indication.
x 10 : Multiply reading by ten.
x 100 : Multiply reading by one hundred.
x 1000 : Multiply reading by one thousand.
3
ft /min : Cubic feet per minute.
3
m /min : Cubic meters per minute.
Memory Display :
TEST ID 0 – 4 : Manu data memory indication.
TEST ID 5 – 9 : Auto data memory indication.
SAMLE : Data memory number address indication.
: Total average data number indication.
M : Data memory indication, M display one time store one data into the
memory.
R : Data read mode indication.
TC s : Average time constant indication.
INTV : Auto data memory interval time indication.
: Low battery indication.
8