Switching The Display's Brightness; Having The Illumination Lamp Off; Playing Cds; Recording - Marantz PM-KI RUBY Owner's Manual

Switching the display's brightness

The display brightness can be adjusted between four levels.
Switching the display off reduces a source of noise that
affects sound quality, enabling higher sound quality playback.
1
Press DISPLAY.
The brightness of the display switches each time
DISPLAY is pressed.
The display brightness is set to most brightly by default.
0
If you operate the VOLUME knob or another control when
0
the display is off, the display turns on again. When
operation is finished, the display turns off automatically
after approximately 2 seconds.
When the display brightness is set to off, the illumination
0
lamp turns off too.

Having the illumination lamp off

1
Press and hold DISPLAY for 2 seconds or
more while the illumination lamp is lit.
Press and hold DISPLAY for two seconds and longer
while the lamp is always off to return to the normal
setting.

Playing CDs

This section uses playback from a CD as an example.
1
Press X on the main unit to turn the power on.
2
Use INPUT df to switch the input source to
"CD".
"CD" appears on the display.
3
Playback the CD.
4
Use VOLUME df to adjust the volume.

Recording

Audio signals input into this unit can be output to an external
recording device. When recording audio from a playback
device connected to this unit, audio can be recorded with the
playback device still connected to this unit.
1
Press X on the main unit to turn the power on.
2
Use INPUT df to switch to the input source
from which you want to record.
The selected input source is displayed on the display.
3
Recording starts.
For information on operations, see the owner's
0
manual of the recording device.
ENGLISH
18