Selecting Mode; Humidification Setting - Sharp KC-G60E Operation Manual

PLASMACLUSTER ION
SPOT MODE
Use this mode when you want to remove adhering odor,
germs, and other substances from cloths, sofas and curtains.
NOTE
• Emits highdensity Plasmacluster Ions only in the forward
direction.

SELECTING MODE

POLLEN SLEEP
NOTE
SLEEP
The unit will operate quietly, and the fan speed is
automatically switched depending on the amount of impurities
in the air.
The Front Display, Cleanliness Monitor and Air Outlet LED
go off automatically.
POLLEN
and quickly detects impurities such as dust and pollen and
clean the air powerfully.
CHILD LOCK
Operation of the operation panel will be locked.
ON CANCELLATION
more
3 sec.
Adjust Front Louver manually.
LOW MED
more
3 sec.

HUMIDIFICATION SETTING

REFILLING THE WATER TANK
1
Remove
the Water Tank.
Push the handle

down.
Pull it forward.

2
Fill the Water Tank
with the tap water.
3
To prevent leaks ,
securely tighten the
Tank Cap.
4
Install
the Water Tank.
ON
NOTE
table below, the unit automatically controls humidity by sensing
ALL MODE
Temperature
2
1
Click
2
1
OFF
Humidity
SLEEP
MODE