Download Print this page

Troubleshooting - Sharp KC-G60E Operation Manual

Air purifier with humidifying function
Hide thumbs



Before contact for service, review the troubleshooting chart below to make sure that the problem is not a unit
Odor and smoke persists.
The Cleanliness Monitor is blue even
when the air is not clean.
The Cleanliness Monitor light is red
even when the air is clean.
The unit makes a clicking or ticking
Air discharged from the unit has an
The unit does not operate when
cigarette smoke is in the air.
The FILTER RESET Indicator Light is on.
The Front Display is turned off.
The Humidify Light on the Front Display
does not light up when the tank is
The water level in the tank does not
decrease or decreases slowly.
The Cleanliness Monitor changes color
There is a discrepancy between the
unit's Humidity Monitor and another
hygrometer in the room.
The unit HAZE / PM2.5 Light does not
match weather report or other local
PM2.5 data.
• The air may have been dirty when the unit was plugged in.
Unplug the unit, wait one minute, and then plug the unit in again.
• The unit may make clicking or ticking sounds when it is
generating ions.
• Use only fresh tap water. Using other water sources risks the
growth of mold, fungi, or bacteria.
• Make sure the unit is installed in a location in which the sensors
can detect cigarette smoke.
connect the power cord to an outlet and then press the Filter
• When Light control is set to "Auto", the light automatically turns
off when the room is dark. Moreover, when Light control is set
to "Turn off", the light is always off. If you do not want the light to
• The room has reached the appropriate level of humidity and has
stopped humidifying.
• Check to see if the Humidifying Tray and Water Tank are
• The Cleanliness Monitor automatically changes color when the
If you are concerned about the change, you can change sensor
• There is a difference in the humidity level within the same room.
• The sensor have different measurement parameters.
• If the monitor indicates wattage or temperature, switch the
If error occurs repeatedly, contact the Sharp Service Center.
Make sure that the Humidifying Filter and Humidifying Tray are properly
installed, and then turn the power to ON again.
Unplug the unit, wait one minute, and then plug the unit in again.

Hide quick links:



  Related Manuals for Sharp KC-G60E

This manual is also suitable for:

Kc-g50eKc-g40eKc-g60lKc-g50lKc-g40lKc-g60m ... Show all