NOTE: A backward clock change uses two (2) records to maintain data integrity. This assures that previously
recorded data is not overwritten. If it is necessary to make small backward time changes, less than one (1) hour,
the user should wait until the current hour has progressed far enough to make a change that does not cross an
hour boundary.
Components and spare parts
G4
The XRC
components are identified in Figure 68 and Figure 69. Component details and Spare part list are available in Table
14 and Table 15 respectively.
G4
Figure 68: XRC
6490 component/cable locations
XSeriesG4 Remote Controller User's manual 2103334 Rev. AB | 71
4 Maintenance