Figure 62: Transferred To Device Application Credits - ABB XSeriesG4 User Manual

Hide thumbs Also See for XSeriesG4:
Table of Contents

Advertisement

Transferring credits from device to credit key
As has been mentioned before, excess credits (credits beyond what would be required to be fully licensed) can be taken from
the G4 device and returned to the credit key to be used on other G4 meters.
Credits can be transferred from the device (G4). The user selects the type of credit and the amount of those credits to be
transferred.
NOTES: If the XRC
other meters.
G4
If the XRC
requires additional credits, these credits can be transferred from the credit key. See section
3.6.4, Transferring credits from credit key to device previously in this section.
To transfer application credits to the G4 device, connect to the G4 unit with PCCU32 7.0 (or later).
Go to the Application Licensing tab.
Install the credit key in an available USB port.
Click Load to view available credits.
NOTE: This screen shows the licensing status of the G4 meter/controller as well as the available credits on
the credit key. The left pane shows the type and amount of the available credits on the credit key. The upper-
right pane is for information only. It shows the various applications available and the type and amount of credit
necessary to run the application. The standard credits (and four general credits) come with the purchase of
the G4 unit. The lower-right pane displays the licensing status of the G4 unit. It shows what credits are in the
machine, what credits are being used and any surplus or deficit of credits. A surplus of credits is highlighted in
green. A deficit of credits is highlighted in red.
Select Transfer to Key, located in the center of the screen (Figure 63).
Directly below, select the type of credit using the drop down menu.
Below that, select the amount of credits to transfer.
Click Transfer.
The transferred credits should now appear on the left side of the screen (see Figure 64).

Figure 62: Transferred to Device application credits

G4
has a surplus of credits, these credits can be transferred to the credit key to be used on
64

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xrcg4 6790Xrcg4 6890Xrcg4 6490Xrcg4 6990

Table of Contents