Figure 56: Loading Credit Key Status - ABB XSeriesG4 User Manual

When installation is complete, click Finish.
NOTE: If the user inserts the credit key in a different USB port on the computer, it will need to be installed for that
new USB port. In other words, the credit key must be installed on each available USB port if not using the same
USB port each time.
Access and view the credit key
To access and view the credit key use PCCU32 7.0 (or later). The credit key is a secure device only accessible through
PCCU32.
Step-by-step instructions
Install the credit key in an available USB port.
Open PCCU32 and disconnect from the unit, if connected.
Go to the Credit Key License Utility (Operate > File Utilities > Credit Key License Utility).
NOTE: To go to the Credit Key License Utility, the computer cannot be connected to the G4 meter or controller.
Simply have PCCU32 running and the initial Totalflow screen displayed.
When the Credit Key Status and Update Utility screen opens, click Load to view available credits on the USB Key (Figure
56).
In this instance (Figure 57), the credit key has 30 general credits, 3 IEC credits, 3 CO2 credits and 2 HCDP credits.
Use this same dialog box to add more credits to the credit key.

Figure 56: Loading credit key status

60