Network Connectivity (Dynamic Ip With Router); Optional Keypad; Figure 14: Usb Local Communication Cable; Figure 15: Ethernet Communication Cable - ABB XSeriesG4 User Manual

Network connectivity (dynamic IP with router)

G4
When operating the XRC
communication with the meter over an Ethernet connection (TCP/IP) requires the use of a hub, switch or router, along with
appropriate cabling (see Figure 15). Ethernet (local) communication in a remote area may also be utilized.

Optional keypad

The XSeries models may be configured to include the optional keypad (see Figure 16) located on the front cover of the unit.
Keypad entry allows the user to monitor programmed display items without using additional equipment. See Figure 17 through
Figure 20 for outline dimensions.
NOTE: To be able to view various display items, those items must be pre-programmed for keypad entry. All the
display items for an application may be programmed, or display items may be individually programmed within the
application using PCCU32.

Figure 14: USB local communication cable

in a network environment, using Ethernet is an excellent and practical solution. PCCU32

Figure 15: Ethernet communication cable

XSeriesG4 Remote Controller User's manual 2103334 Rev. AB | 19
1 System overview