Advertisement
Remove all pecking material and accessories.
Examine the oven for any damage such as dents
or broken door. Do not install if oven is damaged.
1. Select a level surface that provides enough
open space (see illustration
at right) for the
inlet and/or outlet vents.
• Leave a minimum
clearance of 3 inches
(7.5 cm)
above the oven.
• Do not remove the legs from the bottom
of the
oven.
• Blocking
the inlet and/or outlet openings can
damage the oven.
• Do not install oven over a range, cooktop or
other heat-producing
appliance.
2. Plug your oven into a standard
120-volt / 6O-Hz
household
outlet. Be sure the electrical
circuit
is at least 15 amperes and that your microwave
oven is the only appliance
on the circuit.
To install the oven under the cabinet, optional
mounting
kit, Stock No. 20-84339 (White) or
20-66900 (Black) is available.
Contact your Sears store.
On installation
of mounting
kit, 1 inch (2.5 cm)
must be allowed
on both sides of oven and
4 inches (10 cm) must be allowed
under bottom
of
oven.
OPEN
A minimum
clearance of 3 inches (7.5 cm)
is required
between the oven and any
adjacent wall. One side must be open.
NOTE:
This unit is not designed for 50 Hz or any
circuit other than a 120-volt/60-Hz
AC circuit.
This oven is designed for countertop
or
under-cabinet
installation.
Insertion
into a
cabinet
or wall will damage
the product
and
void the warranty.
5
Advertisement
