Local Conference Calls - Polycom SoundPoint IP 650 Phone Quick Start Manual

ENDING A CALL
Using the Handset: Hang up or press the EndCall soft key.
Using the Speakerphone:
Press or the EndCall soft key.
Using the optional Headset:
or the EndCall soft key.
Press
MICROPHONE MUTE
During a call, press
You can hear all other parties while Mute is enabled.
To turn off Mute, press
CALL HOLD AND RESUME
1. During a call, press
2. Press again, the Resume soft key, or the line key to resume the call.

LOCAL CONFERENCE CALLS*

To create a three-way local conference call:
Pick up the handset and dial the number or dial the number first, and then pick up the
handset.
1. Call the first party.
2. Press
(the active call is placed on hold).
3. Place a call to the second party.
4. When the second party answers, press
join all parties in the conference.
TIPS
• When a conference has been established, pressing the Split soft key will split
the conference into two calls on hold.
• Placing the call on hold on the conference originator's phone will place the other
parties in the conference on hold.
• A conference may be created at any time between an active call and a call
which is on hold (on the same line or another line) by pressing the Join soft key.
• Ending the call on the conference originator's phone will allow the other parties
to continue the conference.
* Conferencing is an optional feature that must be configured
. Mute applies to all modes: handset, headset, and hands-free.
again.
or the Hold soft key.
or the Confrnc soft key to create a new call
on the call server. Particulars and menu options may vary
or the Confrnc soft key again to
.