Controller/Keypad; Lcd Display - Sullair ShopTek ST400 User Manual

USER MANUAL
S T
™
HOP EK
®
S
11
1. Run Mode Indicator Light (Green)
2. Power On Indicator Light (Red)
3. Fault Warning Indicator Light (Red)
4. Display Panel
5. Stop Button
2.7

CONTROLLER/KEYPAD

Refer to Figure 2-9. The Controller keypad has two
main pads for compressor control. To start the
compressor operation, press the green Start pad
.
To stop compressor operation, press the red Stop
pad . The Run mode indicator
whenever the control is in an operating mode.
2.8

LCD DISPLAY

The display's normal view shows the compressor
18
10 9 8
Figure 2-9: Controller Panel
lights up
02250180-090 R00
X
7 6
6. Start Button
7. Return/Reset Button
8. Cursor/Confirm Button
9. Up Button
10. Down Button
11. Set/Load/Unload Button
package's discharge pressure, internal temperature,
operating mode, and load status. The modes are
MANUAL, STOP, AUTOMATIC, or FAULT.
Refer to Figure 2-10. If a machine fault occurs, the
red fault indicator will light up, and the display will
indicate that a fault has occurred.
STOP:
RTD Fault
Figure 2-10
SECTION 2
1
2
3
4
5