Be sure unit is full of water and plugged in.
Set the Fan selectionswitch to the desired
Set Humidity Control to medium position.
NOTE: Humidifier should operate with
humidity control on the recommended
MEDIUM setting, if it does not, the humidity
is at a relatively high level. To test the unit
under this condition, turn Humidity Control
all the way to MAX and unit should begin to
operate. After unit has been tested, set
Humidity Control to MEDIUM or desired
Allow 24 hours for humidifier to adjust.
If humidity level in home is sufficient, the
humidifier will only operate with Humidity
Control set on maximum.
IMPORTANT: Water damage may result if
starts to form on windows
or walls. Humidity Control setting should
be lowered until condensation no longer
Your Humidifier --
If humidifier stops running, the humidity
lever is at the normal requirements for that
setting or it is adjusting tothe home condi-
tions. The table below shows approximate
relative humidity percentages which cor-
respond to the various settings of the
20°F & above
Operating Tips for Best Performance
1. Position the humidifier at least 2 inches
4. Regular cleaning as instructed in the
from any watt and away from any heat
"Cleaning of Humidifier" section of this
manual is recommended.
2. Do not restrict airflow from entering or
5, Replacement of the evaporative wicking
exiting the humidifier.
filter at least once per humidification
3. Use Sears recommended
season= or more depending
42_14900 t0 retard bacteria growth that
conditions inyour area.
rni_ycause 0d0'rsand may be harmful to