Grasp the water bottle handle, and lower
into the cabinet The "E-Z-Fill Side-Cap"
must be facing the center of the cabinet,
When positioned properly, the plunger wilt
open and water will ftow into the cabinet.
The water level will automatically remain at
approximately 1" until the bottle isempty.
The unit is now ready for operation.
The operating controls of your Kenmore
Quiet Comfort whole house humidifier are
located on the top right of the humidifier.
The controls are found under the smoked
Lift the control cover by placing your finger
in the round cutout and lifting. The cover
will stay open. Nov; you can clearly see the
control area. Familiarize yourself with the
controls and reference the diagram of the
control area for the correct naming used in
Adjust the amount of humidity depending
on your needs. The humidifier will turn on
and off as required to maintain level of
humidity selected. MEDIUM setting is rec-
but there are times when tow
or high amount of humidity may be pre-
ferred. For constant operation of humidi-
fier, MAX allows for the maximum amount
of humidity to be evaporated into the air
IMPORTANT: Water damage may result if
starts to form on windows
or walls. Humidity Control setting should
be towered until condensation
The higher the air flow speed, the more
water is evaporated and released into the
air. Low speed is the quietest and is pro-
vided for conditions that may not require
as high an evaporation rate.
When the unit has a small amount of
water left in it, the fill light wilt come on
and the unit will automatically
Your Kenmore Quiet Comfort Whole
House humidifier has a three speed fan
contro[ switch. (Low, Medium and High)
The maximum humidity output is obtained
with the fan control on high.
".V J ,;