Invacare Dragon Vertic Service Manual page 47

®
Invacare - Dragon Vertic
·
Remove the battery cover.
·
Cut through the cable tie (A).
·
Remove the actuator cable connector from the electronic
system.
·
Arrange for a second person to support the verticalizer.
·
Remove the security lock locking device of the upper
retaining pin (1).
·
Remove the retaining pin.
·
Remove the security lock locking device of the lower
retaining pin (2).
·
The actuator retaining pins are to be found at (1) and (2).
·
Pull out the actuator.
·
Insert the new actuator.
·
Re-apply the retaining pins and security lock
locking devices.
·
Secure the actuator cable using new cable
ties.
·
Check all functions of the verticalizer.
SERVICE MANUAL
47