Invacare Dragon Vertic Service Manual page 26

SERVICE MANUAL
·
Unscrew the hand wheels (screws) (1) on
both sides of the electronic system
panelling.
·
Remove the electronic system panelling.
·
Remove the motor plug (1) on the motor to
be replaced from the electronic system.
·
The motor cable is fastened to the frame by
means of a cable tie. Cut through the cable
tie using the edge cutter.
·
Use the 8 mm Allen key and the 19 mm
open-ended spanner to release the motor
mounting (1) and remove.
·
Remove the motor from the mounting in a
downward direction.
26
®
Invacare - Dragon Vertic