Invacare Dragon Vertic Service Manual page 25

®
Invacare - Dragon Vertic
·
Pull off and push back the battery pole caps
in order to access the battery poles.
·
Release the battery pole clamps (1) using
the 11 mm open-ended spanner.
·
Pull out the batteries.
·
Use the block of wood to jack up the vehicle.
·
Use the 5 mm Allen key to loosen the Allen
head screw (1).
·
Remove the screw and the wheel rim.
·
Remove the complete wheel from the wheel
hub.
·
The front release bar connection (1) must be
released in order to remove the motor. Use
the small, flat screwdriver to loosen the
retaining clip (1) and pull out.
SERVICE MANUAL
25