Daikin D Series Service Manual page 76

Instruction
To start COMFORT AIRFLOW operation
3. Press "COMFORT AIRFLOW button".
The flap position will change, preventing air from blowing directly on the occupants of the room.
• " " is displayed on the LCD.
〈COOL/DRY〉 The flap will go up.
〈HEAT〉 The flap will go down.
To cancel COMFORT AIRFLOW operation
4. Press "COMFORT AIRFLOW button" again.
• The flaps will return to the memory position from before COMFORT AIRFLOW mode.
Notes on COMFORT AIRFLOW operation
• POWERFUL operation and COMFORT AIRFLOW operation cannot be used at the same time.
Priority is given to POWERFUL operation.
Notes on flaps and louvers angles
• When " SWING button " is selected, the flaps
swinging range depends on the operation mode.
(See the figure.)
ATTENTION
• Always use a remote controller to adjust the flaps
angle. If you attempt to move it forcibly with hand
when it is swinging, the mechanism may be broken.
• Be careful when adjusting the louvers. Inside the
air outlet, a fan is rotating at a high speed.
66
In DRY mode or COOL mode
When stop operation
10°
Upper limit
50°
Lower limit
In HEAT mode
When stop operation
30°
Upper limit
65°
Lower limit
In FAN mode
When stop operation
5°
Upper limit
70°
Lower limit
SiEBE04-507
System Configuration