Removal Of Electrical Box - Daikin D Series Service Manual

Indoor Unit
1.5

Removal of Electrical Box

Procedure
Step
1 The figure shows the
connections of wire
harnesses.
2 Remove the screw of
the electric wire
retaining plate.
3 Loosen the screws of
the terminal board and
disconnect the
connecting wires.
4 Remove the connector
of the swing motor [S6].
138
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Drip proof
plate
Preparation
Electrical
Remove the front grille
component box
according to the "Removal
of Front Grille."
(R4338)
[S6]
(R4341)
SiEBE04-507
Points
Removal Procedure