Information About Maintenance; Useful Information About Maintenance; Periodic Maintenance - Kohler KDI 2504 M-MP Owner's Manual

5

5.1 Useful information about maintenance

• This chapter shows all operations described in the Tab. 5.1
and Tab. 5.2 that may be directly carried out by the user.
• Periodic inspection and maintenance operations must
be carried out as indicated in this manual and are the
responsability of the user.
• Failure to comply with these service and maintenance
intervals increases the risk of technical damage to the engine.
Any non compliance makes the warranty become null and
void.
• In order to prevent personal and property damage read
carefully the instructions listed below before proceeding with
any operation of the engine.

5.2 Periodic maintenance

The intervals of preventive maintenance in Tab. 5.1 and Tab. 5.2 refer to the engine operating under normal operating conditions
with fuel and oil meeting the recommended specifications.
Tab. 5.1
OPERATION DESCRIPTION
Engine oil level
Coolant level
Radiator heat-exchange surface
Rubber hose
Fuel hose
Starter Motor
(5)
Tab. 5.2
OPERATION DESCRIPTION
Engine oil
(1)
Oil filter cartridge
(1)
Fuel filter cartridge
(1)
Coolant pump belt
(3) (5)
Alternator belt
(3) (5)
Coolant
(4)
Coolant hoses
(5) (7)
Fuel hoses
(5) (7)
Dry air cleaner cartridge
Water pump impeller
(1) - In case of low use: 12 months.
(2) -The period of time that must elapse before checking
the filter element depends on the environment in which
the engine operates. The air filter must be cleaned and
EN
replaced more frequently under very dusty conditions.
(3) - In case of low use: 36 months.
(4) - In case of low use: 24 months.
(5) - The replacement must be carried out by authorized
22

INFORMATION ABOUT MAINTENANCE

CLEANING AND CHECKING
(2)
and prefilter
(8)
(2)
Warning
• Inspections must be made when the engine is off and cold.
• Place engine on level sur face to ensure accurate
measurement of oil level.
• Before starting, to avoid spillages of oil make sure that:
- the oil dipstick is inserted correctly;
- also check that:
oil drain plug and
oil filler cap are tightened firmly.
Important
• Before proceeding with operation, read
PERIOD (HOURS)
10 250
REPLACEMENT
PERIOD (HOURS)
10 250
Lombardini Marine workshops.
(7) - The replacement interval is only an indication, it strongly
depends from environmental condition and hose status
detected during regular visual inspection.
(8) - Not supplied by Lombardini Marine.
Par. 3.2.2.
500 1000 5000
500 1000 1500 5000
ED0053031100
PAR.
5.3
5.5
5.6
5.4
5.4
--
PAR.
6.1
6.2
6.3
6.7
6.6
6.5
--
--
6.8
6.4
_00