10.2.2 Water
auxiliary heating
The water temperature achieved by the
auxiliary heating system depends on
the setting of the thermostat on:
- the cylinder AND
- the auxiliary / solar heating source
Figure 16: Adjustment water temperature auxiliary source
10.3 Maintenance
The maintenance of this
appliance must be carried
out by a suitably qualified
person
recommended to maintain
the unit on an annual basis.
Isolate
supplies
before commencing work.
Danger of electrical shock!
See section 7.
temperature
Manual re-set
Dial to adjust water
temperature
only.
It
is
all
electrical
from
the
unit
Operation
The adjustment at the cylinder is
carried out on the twin thermostat
fitted to the cylinder as shown in Figure
16.
In
the
event
temperature cut-out engages, it will be
necessary
to
manually
thermostat. Use a suitable electrically
insulated tool to push the manual reset
button and inform the installer.
that
the
high
reset
the