Front Panel; Rear Panel - Datavideo MS-2850 Instruction Manual

Front Panel

TLM-170LM:
17" HD / SD monitor which slides out
from a 1 RU storage position. Connections for SDI /
HD-SDI and HDMI. Display overlays for Time code,
Center Mark, 4:3 aspect ratio, Cinema Zone and
embedded audio peak meter (SDI / HDMI only).
HDR-70:
SDI / HD-SDI Removable HDD recorder.
Records I-Frame only 100Mbps to m2t files.
VSM-100:
Waveform and Vector scope monitor for
video signal analysis.
ITC-100:
Eight channel wired talkback system with
integrated tally interface. Supplied with cables, belt
packs, headsets and tally lights.
SE-2850 CTL:
SD / HD Digital Video Switcher.
Main unit and Control Panel. Provides 10 bit 4:2:2
broadcast quality pictures

Rear Panel

RP-64:
1U rack mount panel with 8 CVBS output
ports.
RP-31:
ITC-100 talk back breakout panel. Rack
panel for connection of ITC-100 belt pack cables
(5pin XLR).
PD-6: Power Distribution center for non-
Datavideo production kit whilst on location or in
studio.
RP-51:
1U Half Rack panel with Switcher's SDI
PGM outputs and HDMI Multi-view output 2.
AD-100M:
Audio Delay Unit. Delay Program audio
by up to 17 frames.
PD-2A:
Power Distribution unit with automatic
failover from AC to DC input.
SE-2850 Main Unit:
Main unit rear panel with
power, control panel and multi-view outputs already
connected for your convenience.
MS-2850B
10