Front Panel; Rear Panel - Datavideo MS-2850 Instruction Manual

Front Panel

TLM-170LM:
17" HD / SD monitor which slides
out from a 1 RU storage position. Connections for
SDI / HD-SDI and HDMI. Display overlays for
Timecode, Center Mark, 4:3 aspect ratio, Cinema
Zone and embedded audio peak meter (SDI /
HDMI only).
AD-200 CTL:
Control Panel for Audio Delay Unit.
HDR-70:
SDI / HD-SDI Removable HDD recorder.
Records I-Frame only 100Mbps to m2t files.
VSM-100:
Waveform and Vector scope monitor
for video signal analysis.
ITC-100:
Eight channel wired talkback system
with integrated tally interface. Supplied with cables,
belt packs, headsets and tally lights.
SE-2850 CTL:
SD / HD Digital Video Switcher.
Main unit and Control Panel. Provides 10 bit 4:2:2
broadcast quality pictures.

Rear Panel

RP-62:
ITC-100 talk back breakout panel with
Switcher's SDI PGM outputs and HDMI Multi-view
output 2. Rack panel for connection of ITC-100 belt
pack cables (5pin XLR).
RP-64:
1U rack mount panel with 8 CVBS output
ports.
PD-6:
Power Distribution center for non-Datavideo
production kit whilst on location or in studio.
AD-200 Main Unit:
Audio Delay Unit. Delay
Program audio by up to 3 seconds.
PD-2A:
Power Distribution unit with automatic
failover from AC to DC input.
SE-2850 Main Unit:
Main unit rear panel with
power, control panel and multi-view outputs already
connected for your convenience.
MS-2850D
12