Wiring Diagram - V-ZUG GK11TGA Operating Instructions Manual

Table of Contents

Advertisement

Fault
The kitchen smells of gas. A gas tap has been left on.
The burner immediately
switches off after releasing
the control knob.
Any of the following are considered to be abnormal operation
and may require servicing:
Yellow tipping of the cooktop burner flame.
Sooting up of cooking utensils.
Burners not lighting properly.
Gas valves, which are difficult to turn in case the appliance fails
to operate correctly, contact the authorised service provider in
your area.

Wiring diagram

Switch
A
Blue wire
B
Brown wire
C
Terminal
D
Ignition module
E
Possible cause
Incorrect coupling of gas cylinder.
Possible gas leak.
The control knob was not held down for long
enough.
The grooves on the burner are dirty.
Solution
Turn off the taps.
Check that the coupling is sound.
Shut off the gas supply, ventilate the premises and
immediately notify an authorised installation techni-
cian to check and certify the installation. Do not
use the appliance until ensuring that there is no
gas leak in the installation or appliance itself.
Once the burner is on, hold the control knob down
a few seconds longer.
Clean the grooves on the burner.
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gk11tgGk51tpgGk51tpga

Table of Contents