Check The Operation Of The Trailer Hitch - Honda 08L92-TLA-100 Installation Instructions Manual

Trailer hitch
Table of Contents

Advertisement

www.collegehillshonda.com
94. Remove the vehicle clip, and install the new clip to
the left quarter pillar trim.
LEFT QUARTER
PILLAR TRIM
(inside)
NEW CLIP
(supplied)
LEFT QUARTER
PILLAR TRIM
(outside)
95. Check the overlap between the headliner and the left
quarter pillar trim. 
NOTE: Check and adjust the overlap as described in
the service information.
96. Install the left quarter pillar trim.
NOTE: Make sure the side curtain airbag is not
tucked under the clip. Do not push the left quarter
pillar trim excessively.
97. Check that all wire harnesses are routed properly
and all connectors are plugged in.
98. Install all removed parts.
99. Connect the negative cable to the battery.
100. Press and hold the audio unit power button for 2
seconds to restore the audio and navi (if equipped)
system functions.
101. Set the clock on vehicles without navigation.
102. Provide rear bumper beam and six bolts (removed in
step 23) to customer.
34 of 40

Check the Operation of the Trailer Hitch

103. Refer to the "TRAILER HARNESS TESTER", and do
the "Trailer Harness Circuit Check".
VEHICLE CLIP
(Do not reuse.)
AII07457-09 (1710)
© 2017 American Honda Motor Co., Inc. – All Rights Reserved.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents