Honda 08L92-TLA-100 Installation Instructions Manual page 35

www.collegehillshonda.com
Install the ball mount to the trailer hitch using a hitch pin clip and hitch pin.
Whenever you remove the hitch pin clip, the hitch pin, and the ball mount, store them securely in the cargo area. Install
the receiver cover into the opening at the end of the trailer hitch. 
When you reinstall the ball mount, store the receiver cover in the cargo area.
HITCH PIN CLIP
TRAILER
HITCH
HITCH PIN
After the first 600 miles (1,000 km) of towing, have your Honda dealer check the tightness of the trailer hitch bolts.
If you remove the trailer hitch, replace with the appropriate rear bumper beam. Failure to replace the rear bumper
beam will reduce crashworthiness and increase the likelihood of severe injury or death in a collision.
© 2017 American Honda Motor Co., Inc. – All Rights Reserved.
Put a copy of this page in the glove box for your customer.
HITCH PIN
BALL MOUNT
WARNING
CAUTION LABEL
TRAILER
HITCH
AII07457-09 (1710)
TRAILER
HITCH
RECEIVER
COVER
35 of 40