Operation - Honda Backup Sensors User's Information Manual

Operation

Before using the backup sensors, become familiar
with the types of sounds in relation to the distances
between the sensors and the obstacle by actually
backing your vehicle into a garage or parking space.
Also confirm the obstacle detecting range of each
backup sensor.
1. Apply the parking brake.
2. Turn the ignition switch to ON (II), but not
start the engine yet.
3. Move the shift lever to reverse.
10
ON
4. With one of the doors open, check that the
audible signal sounds by slowly bringing
the palm of your hand close to each sensor
as described:
For the corner sensors:
From 2.0 feet (60 cm)
For the center sensors:
From 4.9 feet (150 cm)
Confirm that the sound of the corner
sensors is different from that of the center
sensors.
Confirm the obstacle
detecting range of
each sensor.
© 2006 American Honda Motor Co., Inc. - All Rights Reserved.
4202080Y