Honda 08L92-TLA-100 Installation Instructions Manual page 17

www.collegehillshonda.com
40. While wearing eye protection, enlarge the 3 mm hole
to 14 mm using a 14 mm hole saw. Remove any
burrs. 
NOTE: Make sure to drill perpendicular to the rear
bumper.
3 mm HOLE
REAR
BUMPER
© 2017 American Honda Motor Co., Inc. – All Rights Reserved.
REAR BUMPER
(inside)
DRILL
(Drill 
perpendicular.)
14 mm 
HOLE SAW
41. Check the installation condition of the sensor bars in
the hands free access unit.
OPPOSITE
SIDE VIEW
Make sure that
the sensor bar
is attached.
AII07457-09 (1710)
SENSOR BAR
Make sure that
the sensor bar
is attached.
HANDS FREE
ACCESS UNIT
SENSOR BAR
Make sure that
SENSOR
the sensor bar
BAR
is attached.
17 of 40