Table of Contents
Advertisement
Before using the backup sensors, become familiar
with the types of sounds in relation to the distances
between the sensors and the obstacle by parking
your vehicle in a garage or parking space. Also
confirm the obstacle detecting range of each
backup sensor.
1.
Apply the parking brake.
2.
Turn the ignition switch to ON (II), but do
not start the engine yet.
3.
Move the shift lever to reverse.
Confirm that the buzzer beeps for about
one second when moving the shift lever to
reverse.
This initial beep indicates the system is
working properly.
© 2008 American Honda Motor Co., Inc. - All Rights Reserved.
ON
4.
With one of the doors open, check that the
buzzer beeps by slowly moving a board
close to each sensor as described:
Corner sensors:
From 2.0 ft (60 cm)
Center sensors:
From 4.9 ft (150 cm)
Confirm the obstacle
detecting range of
each sensor.
BOARD
Operation
2.0 ft
(60 cm)
2.0 ft
(60 cm)
11
Advertisement
Table of Contents
